3M ELECTRONIC SPECIALTY ITEMS
IN STOCK AT
MARSH ELECTRONICS
3MTM TemflexTM 1700 General Use Vinyl Electrical Tape • $.77
3MTM TemflexTM 1700 General Use Vinyl Electrical Tape is used for protective jacketing and harnessing. Abrasive- and UV-resistant. UL Listed and CSA Certified for 176°F (80°C). 7 mil vinyl tape is the economical solution for less demanding indoor jobs. Black. 3/4" x 60'.
3MTM Duct Tape 3939 • $8.29
Economy grade duct tape. Polyethylene coated cloth backing with rubber adhesive. High tack, conformability, strength and easy tear make 3939 ideal for many duct and moisture sealing, holding, protecting and bundling applications. Gray. 3" x 180'.
3MTM Duct Tape 6969 • $13.00
General purpose grade duct tape. Polyethylene coated cloth backing with rubber adhesive. Ideal for color coding, sealing, holding, protecting from moisture, temporary repairs and general maintenance activities. Silver. 3" x 180'.
3MTM Scotch® 2200 Vinyl Mastic Pads • $2.34
These are self-fusing, rubber-based insulating compound laminated to a flexible, all-weather grade PVC backing. Both pads and rolls are resistant to abrasion, moisture, alkalies, acid, copper corrosion, U.V. and varying weather conditions. 125 mil, 3-1/4 in x 4-1/2 in pads 10 per box.Applications include: bolted connections, service drops, traffic signal wire connections, lighting connections, transformer bushing protection, padding bolted connections on bus bars, grounding rod connection protection, terminal protection, cable end sealiing, secondary compression connections.
Scotch® Super 33+ Vinyl Electrical Tape 06132 • $3.78
Scotch® Super 33+ Electrical Tape a black, 7 mil tape, on a 1 1/2 inch core, combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V. Abrasion-, corrosion-, and UV-resistant, it makes an excellent protective jacketing for high-voltage cables and wire harnessing. UL Listed and CSA Certified, it resists alkalis and acids, and is flame-retardant. Black. 3/4" x 66'.Scotch® 35 Vinyl Electrical Tape for Color Coding
Scotch® 35 Vinyl Electrical Color Coding Tape is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant. Excellent all-weather performance in cold to 0°F (-18°C) or hot to 220°F (105°C). | IN STOCK: 35 Vinyl Electrical Color Coding Tape • 3/4"X66' • $3.25 per roll. | |||||
|---|---|---|---|---|---|
| P/N | Color | P/N | Color | P/N | Color |
| 00072 | Gray | 10810 | Red | 10828 | White |
| 10836 | Blue | 10844 | Yellow | 10851 | Green |
| 10869 | Orange | 10885 | Brown | 11271 | Violet |
Scotch® Super 88 Vinyl Electrical Tape
Scotch® Super 88 Premium Vinyl Electrical Tape offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV rays, abrasion, moisture, copper corrosion, alkalis and acids. Black.| IN STOCK | ||||||
|---|---|---|---|---|---|---|
| P/N | Description | Marsh Price | P/N | Description | Marsh Price | |
| P/N | 3/4" x 44' piece | 3.80 | 10307 | 3/4" x 66' | 2.80 | |
Scotch® 130C Linerless Rubber Splicing Tape 130C(1.5"x30') • $19.48
This is a highly conformable, linerless Ethylene Propylene Rubber (EPR), high-voltage insulating tape that provides excellent thermal dissipation of splice heat. Ideal for a number of applications including bus bar insulation, end-sealing high-voltage cables, motor leads, jacket repairs, sealing collars, closure sealing, drop wire splice insulating, sheath build-up and constructing auxiliary sleeves. Unlike most rubber tapes, Scotch® 130C is linerless which makes it easier and quicker to use. It provides a void-free, permanent seal every time. Black.3M™ 1345 EMI Embossed Tin-Plated Copper Foil Shielding Tape 1345-TAPE • $29.02
This 1.4 tape is an embossed tin plated copper foil with an acrylic pressure-sensitive adhesive on liner. The tape is conductive through the adhesive; oxidation resistant for excellent long-term EMI shielding; static charge draining, grounding; solderable; easily die cut. Available in custom widths from 1/8 in to 24 in, and comes standard on a 18 yd roll on a 3 inch diameter core. 3/4" x 18 yd. (Image not available.)Scotch® Heavy-Duty Double Sided Foam Mounting Tape 114 • $3.14
1" x 50" roll. Holds up to 2 lbs. (900g). Wall mount signs, pictures and decorations on most types of walls. (No image available.)
3M™ FP-301 Thin-Wall Heat Shrink Tubing
3M™ FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. FP-301 clear tubing provides excellent visibility for component packing.All FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow.
FP-301 is available in black, white, red, blue, yellow and clear in the standard lengths of 6-inch (15,2 cm) cut pieces, 48-inch (1,21 m) and small (8.5-inch core diameter) spools of 50 (15,24 m) and 100 (30,48 m) feet. Four-foot lengths of green tubing are available in sizes 1/16 inch to 1/2 inch.
The Assorted Color Kit (FP301KIT-ASSORTED) has a total of 133 pieces and contains seven colors: black, red, white, yellow, blue, green and clear. The Black Kit (FP301KIT-BLACK) contains 102 pieces, all 6" (512,4 mm) lengths. Both kits come in a handy plastic storage box. Refills are available.
Application Specifications: UL Recognized and CSA Certified at 600 volts at 257°F(125°C); UL File No. E-39100 and CSA No. 38227. MIL-I-23053/5, Class 1,2. AMS 3636 (Type I) and AMS 3637 (Type II).
| 3M™ FP-301 Thin-Wall Tubing IN STOCK: | ||
|---|---|---|
| FP301-1-4PB | 1" Black 4' piece | 4.53 |
| FP301-116-4PB | 1/16" Black 4' piece | 1.08 |
| FP301-116-4PC | 1/16" Clear 4' piece | 1.08 |
| FP301-12-4PB | 1/2" Black 4' piece | 3.68 |
| FP301-18-4PB | 1/8" Black 4' piece | 1.92 |
| FP301-18-4PC | 1/8" Clear 4' piece | 1.92 |
| FP301-316-4PC | 3/16" Clear 4' piece | 2.47 |
| FP301-332-4PB | 3/32" Black 4' piece | 1.37 |
| FP301-34-4PB | 3/4" Black 4' piece | 4.26 |
| FP301-364-4PB | 3/64" Black 4' piece | 1.54 |
| FP301-364-4PC | 3/64" Clear 4' piece | 1.42 |
| FP301KIT-ASSORTED | 133pc / 7 Color Kit 6" Lengths 3/32" - 1/2" | 62.81 |
| FP301KIT-BLACK | 102pc Black Kit 6" Lengths 3/16" - 1" | 62.81 |
| FP301SM-1BLA | 1" Black 50' Spool | 51.00 |
| FP301SM-112B | 1.5" Black 50' Spool | 91.32 |
| FP301SM-116B | 1/16" Black 50' Spool | 21.11 |
| FP301SM-112B | 1/16" Clear 50' Spool | 21.11 |
| FP301SM-112B | 1/16" Yellow 50' Spool | 21.11 |
| FP301SM-12B | 1/2" Black 50' Spool | 45.33 |
| FP301SM-12B | 1/2" Clear 50' Spool | 34.41 |
| FP301SM-14B | 1/4" Black 50' Spool | 27.95 |
| FP301SM-14B | 1/4" Clear 50' Spool | 27.10 |
| FP301SM-18B | 1/8" Black 50' Spool | 24.93 |
| FP301SM-18B | 1/8" Clear 50' Spool | 24.93 |
| FP301SM-316B | 3/16" Black 50' Spool | 27.19 |
| FP301SM-316B | 3/16" Clear 50' Spool | 27.19 |
| FP301SM-316B | 3/16" Green 50' Spool | 27.19 |
| FP301SM-332B | 3/32" Black 50' Spool | 22.67 |
| FP301SM-34B | 3/4" Black 50' Spool | 31.73 |
| FP301SM-34B | 3/4" Clear 50' Spool | 31.73 |
| FP301SM-38B | 3/8" Black 50' Spool | 36.26 |
| FP301SM-38B | 3/8" Clear 50' Spool | 36.26 |
3M™ EPS-400 Heat Shrink Tubing
A semi-rigid tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with an internal layer of special thermoplastic adhesive. The heat shrinkable outer wall is selectively cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics. 4:1 shrink ratio. 4' pieces. Black.| IN STOCK | |||||
|---|---|---|---|---|---|
| P/N | Expanded I.D. (Min.) In. (mm) | Recovered I.D.(Min.) In. (mm) | Recovered Melt Wall (Nominal) In. (mm) | Recovered Outer Wall (Min.) In. (mm) | Marsh Price |
| EPS400-300-4PB | . 3 0 0 ( 7 , 6 2 ) | . 0 6 0 ( 1 , 5 2 ) | . 0 3 3 ( 0 , 8 4 ) | . 0 2 8 ( 0 , 7 1 ) | 9.38 |
| EPS400-450-4PB | . 4 5 0 ( 11 , 4 3 ) | . 1 0 5 ( 2 , 6 7 ) | . 0 4 3 ( 1 , 0 9 ) | . 0 5 3 ( 1 , 3 5 ) | 11.33 |
| EPS400-700-4PB | . 7 0 0 ( 1 7 , 7 8 ) | . 1 7 5 ( 4 , 4 5 ) | . 0 6 0 ( 1 , 5 2 ) | . 0 5 5 ( 1 , 4 0 ) | 15.86 |
3M™ SFTW-202 GYS Flexible Tubing
SFTW-202 GYS is a very flexible, flame-retardant, thin wall, green and yellow striped heat shrink polyolefin tubing especially developed for electrical equipment ground lead applications.The unique dual color striping of green and yellow serves as an instant identification for ground wires. GYS has a 2:1 shrink ratio and has been engineered to offer a low shrink temperature of 100 degrees Celcius / 212 degrees Farenheit. This allows the tubing to shrink rapidly and minimizes heat exposure and possible damage to temperature sensitive substrates. The tubing is manufactured using a special co-extrusion process ensuring that the green and yellow color is fully integrated into the tubing wall. It offers excellent chemical and thermal resistance.
| IN STOCK | SFTW202-12-4GYS | 1/2" dia. 4' length | 4.09 | SFTW202-14-4GYS | 1/4" dia. 4' length | 4.39 | SFTW202-18-4GYS | 1/8" dia. 4' length | 2.13 | SFTW202-316-4GYS | 3/16" dia. 4' length | 3.00 | SFTW202-34-4GYS | 3/4" dia. 4' length | 5.47 | SFTW202-38-4GYS | 3/8" dia. 4' length | 3.64 | | ||
ScotchCode™ Wire Marker Tape SDR
These refill rolls for the 3M™ ScotchCode™ Wire Marker Tape Dispensers are eight-feet long. You have the choice of characters (ten numbers, ten ten-number combinations, 26 letters and eight special characters) and colors (Black, Blue, Brown, Green, Grey, Multi-Colored, Orange, Red, Violet, White and Yellow).| IN STOCK SDR Tape Dispenser Refills: | |||||
|---|---|---|---|---|---|
| SDR-+ | Plus Sign (+) | 2.19 | SDR-- | Minus Sign (-) | 2.19 |
| SDR-0 | 0 (Zero) | 2.19 | SDR-1 | 1 (One) | 2.19 |
| SDR-2 | 2 (Two) | 2.19 | SDR-3 | 3 (Three) | 2.19 |
| SDR-4 | 4 (Four) | 2.19 | SDR-5 | 5 (Five) | 2.19 |
| SDR-6 | 6 (Six) | 2.19 | SDR-7 | 7 (Seven) | 2.19 |
| SDR-8 | 8 (Eight) | 2.19 | SDR-9 | 9 (Nine) | 2.19 |
3M™ Scotchcode™ SLW Wire Marker Write-On Dispenser
Wire O.D. 0.23 to 1.32 Inches Larger sized dispenser with tape and SMP marking pen. 70 labels per roll. Marker is 1 x 5 inches, with a write-on area of 1 x 0.75 inches. Recommended for wire with an outer diameter of 0.23 to 1.32 inches. Handy for identifying wire and cable as well as household, automotive, plumbing and sporting equipment.| IN STOCK | ||||||
|---|---|---|---|---|---|---|
| P/N | Labels/Roll | Write–on Area W x L In. (mm) | Marker Size W x L In. (mm) | Recommended WireO.D. In. (mm) | Recommended Wire Size AWG (mm2) | Marsh Price |
| SLW | 70 | 1.0 x 0.75 (25,4 x 19,0) | 1.0 x 5.0 (25,4 x 127,0) | 0.23 to 1.32 (5,8 to 33,5) | 4 to 1000 (22 to 500) | 31.90 |
| SLW-R | Wire Marker Refill Roll. Refill for SLW dispenser. 70 labels per roll. Marker is 1 x 5 inches, with a write-on area of 1 x 0.75 inches. Recommended for wire with an outer diameter of 0.23 to 1.32 inches. | 21.50 | ||||
3M™ ScotchCode™ STD-0-9 Wire Marker Tape Dispenser • $34.63
Dispenser filled with 10 rolls of numbered tape (one each of 0-9). The 3M™ ScotchCode™ STD Tape Dispenser is a compact, carry-along dispenser with ten refillable compartments that hold eight-foot rolls of non-smear polyester tape. Used for marking binder groups, wire or cable, the tapes' high tack, acrylic adhesive resists solvents, oil and water, and adheres firmly to insulation surfaces. An end-loop hooks the dispenser easily to a tool pouch or belt.3M™ ScotchCode™ STD-C Wire Marker Tape Dispenser STD-09W/STD-C • $30.90
Dispenser filled with 10 rolls of colored tape (one each of black, blue, brown, green, gray, orange, red, violet, white and yellow). Combo Pack includes both the STD-09X above & STD-C with markers & tape.3M™ Scotchcode™ SWD Wire Marker Write-On Dispenser, Wire O.D. 0.09 to 0.31 Inches • $27.33
Regular sized dispenser with tape and SMP marking pen. 50 labels per roll. Marker is 0.75 x 1.375 inches, with a write-on area of 0.75 x 0.312 inches. Recommended for wire with an outer diameter of 0.09 to 0.31 inches.3M™ Scotchcode™ SWD-R Wire Marker Refill Roll Refill for SWD Dispenser • $21.11
50 labels per roll. Marker is 0.75 x 1.375 inches, with a write-on area of 0.75 x 0.312 inches. Recommended for wire with an outer diameter of 0.09 to 0.31 inches.
3M™ Scotchmate™ General Purpose Hook & Loop Fasteners
Adhesive backed hook and loop fasteners with peel off back for easy installation. Provides a high-adhesive, moisture-resistant bond to most surfaces. Temperature range is -29°C/-20°F to 49°C/120°F continuous, to 70°C/158°F intermittent.| IN STOCK | ||
|---|---|---|
| P/N | Description | Marsh Price |
| SJ-3526-1B | 1" x 50 yds. Hook, Black | 85.19 |
| SJ-3527-1B | 1" x 50 yds. Loop, Black | 85.19 |
3M™ Scotchlok™ STK-1 RED Terminal Box • $131.94
The 3M™ Scotchlok™ Terminal Kit is filled with 3M™'s most frequently purchased low voltage termination products, including 14 of the most popular terminals in a red metal box with handy compartments.This kit contains: 1 3M™ Scotchlok™ TH-440 Crimping Tool; 1 3M™ ScotchCode™ STD-0-9 Tape Dispenser; 100 3M™ 06225 Cable Ties; 100 3M™ 06226 Cable Ties; 50 3M™ Highland™ RV18-6 Ring Tongue Terminal; 50 3M™ Highland™ RV18-8 Ring Tongue Terminal; 50 3M™ Highland™ RV14-6 Ring Tongue Terminal; 50 3M™ Highland™ RV14-8 Ring Tongue Terminal; 50 3M™ Highland™ RV14-10 Ring Tongue Terminal; 25 3M™ Highland™ RV10-10 Ring Tongue Terminal; 50 3M™ Highland™ BFV14-8 Block Fork Terminal; 50 3M™ Highland™ BFV14-10 Block Fork Terminal; 50 3M™ Highland™ BFV18-8 Block Fork Terminal; 50 3M™ Highland™ BFV18-6 Block Fork Terminal; 50 3M™ Highland™ BSV18 Butt Connector; 50 3M™ Highland™ BSV14 Butt Connector; 25 3M™ Highland™ BSV10 Butt Connector; 50 3M™ Highland™ FDV14-250 Female Disconnect.
3MTM COMMUNICATIONS & WIRING DUCT & ACCESSORIES
PLEASE NOTE: 3M Wiring Duct is being phased out. Please visit our SR Components page to see current stocking items.
3M duct has an easily-installed one-piece design with a unique top-opening hinge that can be opened and closed thousands of time swith no stress cracking or discoloration. Constructed of 94V-O UL listed material with a strong foam-backed acrylic adhesive:| IN STOCK: | ||||||||
|---|---|---|---|---|---|---|---|---|
| P/N | Description | Marsh Price | P/N | Description | Marsh Price | P/N | Description | Marsh Price |
| 801-6A | .75" x .5" x 6', Ash | 9.51 | 802-6A | 1.5" x .75" x 6', Ash | 12.50 | 803-6A | 1.75" x 1" x 6', Ash | 16.08 |
| 801-6I | .75" x .5" x 6', Ivory | 9.35 | 802-6I | 1.5" x .75" x 6', Ivory | 12.50 | 803-6I | 1.75" x 1" x 6', Ivory | 16.08 |
| 801-6W | .75" x .5" x 6', White | 9.52 | 802-6W | 1.5" x .75" x 6', White | 12.50 | 803-6W | 1.75" x 1" x 6', White | 16.08 |
| ACCESSORIES | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FOR 801 DUCT | FOR 802 WIRE DUCT | FOR 803 WIRE DUCT | |||||||||||||||
| End Caps • $1.50 Each | End Caps • $1.65 Each | End Caps • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-ECSP | Ash | 801I-ECSP | Ivory | 801W-ECSP | White | 802A-ECSP | Ash | 802I-ECSP | Ivory | 802W-ECSP | White | 803A-ECSP | Ash | 803I-ECSP | Ivory | 803W-ECSP | White |
| Inside Corners • $1.50 Each | Inside Corners • $1.65 Each | Inside Corners • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-ICSP | Ash | 801I-ICSP | Ivory | 801W-ICSP | White | 802A-ICSP | Ash | 802I-ICSP | Ivory | 802W-ICSP | White | 803A-ICSP | Ash | 803I-ICSP | Ivory | 803W-ICSP | White |
| Joint Covers • $1.50 Each | Joint Covers • $1.65 Each | Joint Covers • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-JCSP | Ash | 801I-JCSP | Ivory | 801W-JCSP | White | 801A-JCSP | Ash | 801I-JCSP | Ivory | 801W-JCSP | White | 803A-JCSP | Ash | 803I-JCSP | Ivory | 803W-JCSP | White |
| Elbows • $1.50 Each | Elbows • $1.65 Each | Elbows • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-LSP | Ash | 801I-LSP | Ivory | 801W-LSP | White | 802A-LSP | Ash | 802I-LSP | Ivory | 801W-LSP | White | 803A-LSP | Ash | 803I-LSP | Ivory | 803W-LSP | White |
| Outside Corners • $1.50 Each | Outside Corners • $1.65 Each | Outside Corners • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-OCSP | Ash | 801I-OCSP | Ivory | 801W-OCSP | White | 801A-OCSP | Ash | 802I-OCSP | Ivory | 802W-OCSP | White | 803A-OCSP | Ash | 803I-OCSP | Ivory | 803W-OCSP | White |
| "T"'s • $1.50 Each | "T"'s • $1.65 Each | "T"'s • $1.77 Each | |||||||||||||||
| P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color | P/N | Color |
| 801A-TSP | Ash | 801I-TSP | Ivory | 801W-TSP | White | 802A-TSP | Ash | 802I-TSP | Ivory | 802W-TSP | White | 803A-TSP | Ash | 803I-TSP | Ivory | 803W-TSP | White |
| REDUCERS FOR ALL WIRE DUCT | |||||||
|---|---|---|---|---|---|---|---|
| P/N | Description | Color | Marsh Price | P/N | Description | Color | Marsh Price |
| 802I-R1SP | 802 to 801 | Ivory | 1.50 | 802W-R1SP | 802 to 801 | White | 1.50 |
| 803A-R1SP | 803 to 801 | Ash | 1.65 | 803A-R2SP | 803 to 802 | Ash | 1.77 |
| 803I-R1SP | 803 to 801 | Ivory | 1.65 | 803I-R2SP | 803 to 802 | Ivory | 1.77 |
| 803W-R1SP | 803 to 801 | White | 1.65 | 803W-R2SP | 803 to 802 | White | 1.77 |
| SURFACE MOUNT BOX KITS • $7.51 Each (includes base, cover and screws) | ||||||
|---|---|---|---|---|---|---|
| P/N | Description | Color | P/N | Description | Color | |
| 800A-HB | High profile | Ash | 800A-LB | Low profile | Ash | |
| 800G-HB | High profile | Gray | 800G-LB | Low profile | Gray | |
| 800G-IB | High profile | Ivory | 800I-LB | Low profile | Ivory | |
| 800W-HB | High profile | White | 800W-LB | Low profile | White | |
3M CONNECTORS IN STOCK AT MARSH ELECTRONICS, INC.
"Performance Plus" Wire Connectors
Because of their increased wire range, jus three 3MTM "Performance +" Wire Connectors handle the work of seven standard connectors and still cover the entire 600-volt copper wire range.3MTM O/B+, R/Y+ and B/G+ Wire Connectors make wiring fast and easy in three ways: they are exceptionally easy to handle, they offer a broad wire capacity, and it takes fewer sizes to get the job done. The exceptional ease of use starts with one-of-a-kind design that incorporates a flexible skirt and a rigid top. The flexible skirt covers over-strips and protects conductors, yet conforms to whatever space is available in a box. This exclusive feature allow a O/B+, R/Y+ and B/G+ connectors to provide maximum protection and fit inside even the most crowded electrical boxes. The rounded wings on the rigid top make 3MTM wire connectors exceptionally easy to handle. Twisting the connector-on or off-is easier than ever. That means fast installation and less wear and tear on your fingers. Inside, the unique spring grips quickly, turns on fast and expands to accept a wide range of wire sizes. It bites into conductors for solid, secure connections. The "plus" connectors also feature a large, funnel-shaped throat design. The connectors meet UL max-fill requirements. All O/B+, R/Y+ and V/G+ wire combinations are UL listed for 600 volts on copper wire.
| P/N | Wire Size | Color | Pcs./Box | Marsh Price |
| O/B+ | 2#22-2#12 AWG | Orange with Blue skirt | 100 | 6.91 |
| R/Y+ | 2#18-2#8-5#12 AWG | Red with Yellow skirt | 100 | 10.97 |
| B/G+ | 4#14-2#6-3#8 AWG | Blue with Gray skirt | 50 | 13.56 |
ULG 19-24 AWG BUTT CONNECTOR • 24¢ Each or 15¢ Each in 500 Count
19-24 AWG, Green and Black. Large Insulation Connector Used For Butt Splicing.UR 19-26 AWG BUTT CONNECTOR • $16.00
100 Pack of 19-26 AWG, Red. The UR connector accepts any two or three solid copper conductor combinations of 0,9 mm - 0,4 mm (19 - 26 AWG) air core or filled cable with a maximum insulation filled cable with a maximum insulation O.D. of 1,67 mm (.066''). Its three ports accept two or three conductors for butt splicing. Like most Scotchlok connectors, the UR connector is filled with a sealant to provide moisture resistance. UR-R also available. 25 Pack • $5.34. Or UR2(CARTRIDGE) 10 Pack of UR connectors in a cartridge • $16.95
UY 19-26 AWG BUTT CONNECTORS • $13.89
100 Pack of 19-26 AWG Butt Connectors, Yellow. The size of the UY connector reduces the splicing bundle O.D. to a minimum. The wires joined can be of different wire gauges. Max. Insulation Outer Dia. - .082 Inch3M™ Scotchlok™ Y Electrical Spring Connectors • $9.33
Box of 100. The original color-coded wire connectors designed with the features electricians request. They're flexible, yet durable with an outer insulator that gives you a compact, fully insulated connection that won't cut or abrade wires. The Y torque fins are engineered to provide a comfortable and secure grip that makes installation fast and back-off easy. The live-action spring delivers reliable, vibration-resistant connections over a wide range of wire combinations from 2 #18 through 3 #8 copper AWG. A deep, flared skirt makes wire insertion easier and protects against shorts and shiners. Finally, the design and a flexible base let 3M™ Scotchlok™ connectors bend with the wires you're slicing to fit easily into tight places. 3M™ Scotchlok™ T-Tap Nylon Insulated Self-Stripping Female QuickSlide Disconnect
Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250 inch (6.35 millimeter) male tab, making a reusable quick-connect wiring termination. T-tap disconnect. Maximum insulation O.D.diameter of 0.150 inches (3,81 mm) and a operating temperature of 221°F (105°C).| IN STOCK | ||
|---|---|---|
| P/N | Description | Marsh Price |
| 951X | 22-18 AWG, Red, 50 Pack | $8.95 |
| 952X | 18-14 AWG, Blue, 50 Pack | $8.95 |
| 953X | 12 AWG, Yellow, 50 Pack | $14.77 |
3M™ Scotchlok™ 314 Electrical IDC Connectors • $22.46
50 Pack of 22 to 14 (0,5-1,5) AWG. The 3M™ Scotchlok™ 314 Self-Stripping, Moisture Resistant Electrical Pigtail Connector provides a moisture-resistant seal. Maximum insulation O.D.diameter of 0.155 inches (3,9 mm) and a operating temperature of 221°F (105°C). Blue.3M™ Scotchlok™ Electrical IDC Connectors
Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, automotive/boat/RV wiring. Flame retardant.| IN STOCK: | ||||||
|---|---|---|---|---|---|---|
| Image | P/N | Description | Color | Max. Insulation O.D. In. (mm) | Operating Temp. | Marsh Price |
 | 558 | 22 to 16 (0,5-1,5) AWG | Red | 0.120 (3,05) | 221°F (105°C) | 21.17 |
 | 560 | 18 to 16 (0,75-1,5) AWG Solid/Stranded, 14 (1,5) AWG Stranded | Light Blue | 0.145 (3,68) | 221°F (105°C) | 12.85 |
 | 562 | 12 (3,0) AWG Solid/Stranded, 10 (4,0) AWG Stranded | 0.190 (4,82) | 221°F (105°C) | Yellow | 23.14 |
