NOW IN STOCK! CBI-1 CIRCUIT BREAKER IDENTIFIER

The Circuit Breaker Identifier CBI-1 makes it extremely easy and fast to find the circuit breaker or fuse that supplies a specific power receptacle or light switch automatically. Just plug the transmitter into a receptacle and make a few quick scans of the power panel (the first scan calibrates the instrument, the second detects the breaker). An audible tone will be clearly heard when the right breaker is scanned. There is no need to shut off power in a time consuming trial and error effort to find the right breaker or fuse. This is a tremendous benefit in both automated office environments where disruption of power is not practical, as well as in residential applications.
Features:

• Quickly identifies and pinpoints 120VAC circuit breakers and fuses
• Self-calibrating - no thumbwheels to adjust
• No need to interrupt power
• Audible tone generated when matching breaker is located

General Specifications
Operating Frequency:	50 to 60Hz
Operating Voltage:	90 to 120VAC
Operating Temperature:	32° to 122°F (0° to 50°C)
Calibration:	Automatic Transmitter
Power:	Powered by wall outlet
Receiver Power:	9V Alkaline battery

CLAMP-ON METERS
501 & 503

• Accuracy to 1% of Reading
• Large easy-to-read 4000 Count Display
• 42 segment bargraph

1045 MEGOHMMETER

• Test Voltage/Range: 250V: 50kohm-2000Megohm; 500V: 100kohm-2000Megohm; 1000V: 200kohm-2000Megohm
• Multi-line 4000-count digital display with 34 segment analog bargraph
• Automatic discharge for operator safety.
• IEC 1010, 600V Cat.III rated.
• Resistance: 0-400kohm, 200mA continuity & alarm functions
• Over-molded slip-proof holster for rugged field use.
• Includes soft carrying pouch 2 color-coded leads, black test probe, alligator clips, batteries, manual

MODEL 1026 DIGITAL MEGOHMMETER

• Measures insulation at 250, 500 & 1000V
• Continuity beeper
• 600V AC safety test voltage range
• Large, easy-to-read digital display
• Data hold switch
• Test button may be “locked on” for three minutes for hands-free operation
• Automatic discharge when test button is released
• Low battery indication CE mark

3711 GROUND RESISTANCE TESTER

• Simple & fast operation — no leads, auxiliary rods or spacing requirements
• Direct reading of ground resistance from 0.01 to 1200Ohm, continuity, ground loop resistance, & ground leakage current from 1 mA to 30 Arms
• Large 32 mm (1.25”) jaw window fits up to 1000 MCM cables
• UL®, CSA & GS approvals pending, meets IEC 1010-1
• Rugged GE Lexan® head & body construction

MODEL 2610 INSULATION RESISTANCE TESTER

SIMPLE LOGGERS IN STOCK:
L100     L220    L260

L100—AC Current Model:	Measurement range 0-10000 Arms; Resolution 8 Bit (Max. depends on probe); Accuracy 1% of Reading + Resolution+probe accuracy; Data Storage 8192 readings
L220—Plug-in AC Voltage Model:	Measurement range-0-225 Vrms; Resolution 8 Bit (125mV max); Accuracy-1% of Reading + Resolution; Data Storage-8192 readings.
L260—Plug-in AC Voltage Model:	Measurement range-0-600 Vrms; Resolution 8 Bit (500mV max); Accuracy-1% of Reading + Resolution; Data Storage-8192 readings.

AEMC CURRENT PROBES

DIAGRAM	MODEL	RATIO	MEASUREMENT RANGE AC/DC	OUTPUT SIGNAL CURRENT (A) OR VOLTAGE (V)	OUTPUT CONN.
	MN103	N/A	1mA to 10A AC 1A to 150A AC	1 mV AC/mA 1 mV AC/A	Lead
	MN106	1000:1	2A TO 150A AC	1mA AC/A	Lead
	SL261	N/A	100mA to 20A AC pk 0.5A to 200A AC pk 5A to 2000A AC pk	100 mV/A 10 mV AC/A 1 mV/A	Lead with BNC
	MD314	N/A	4A to 500A AC	1mVAC/A	Lead

1017.82 KELVIN PROBES

Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.