CHEMTRONICS CHEMICAL PRODUCTS & ACCESSORIES IN STOCK AT MARSH ELECTRONICS
CircuitWorks® Quick-Bond Gel Adhesive Kit
The conveniently packaged adhesive kit for easy and instant bonding of rubber, metal and plastic
Provides strong, instant bonding for rubber, metal and plastic
Ideal for wire tacking
Gel formula is easy to apply and stays in place
Quick-Bond Accelerator insures reliable and instant bonding
Triple distilled cyanoacrylate for longer shelf-life and improved adhesive performance
Adhesive features excellent resistance to impact, weathering and thermal cycling
In Stock: CW4300 3 g (0.10 oz) Adhesive & 2 g (0.07 oz) Accelerator 7.37
CircuitWorks® Conductive Epoxy
The conveniently packaged epoxy for high-strength conductive bonding
Excellent electrical conductivity
High strength conductive bonding
Repairs defective traces and creates jumpers to board
Quick solderless electronic connections
Two Part Epoxy–easy 1:1 mixing ratio
Compatible with CW2200 and CW3300
In Stock: CW2400 Adhesive & Hardener 14 g (0.5 oz) total 19.18
CircuitWorks® Conductive Grease
The syringe grease dispenser which provides superior electrical and thermal conductivity, lubrication and protection
Effectively lubricates metal, rubber and plastic
Protects against moisture and corrosion
Thermally stable over a wide temperature range
Silver Grease: Conductive lubricant containing pure silver
Silver grease has maximum electrical and thermal conductivity
In Stock: CW7100 6.5 g (0.23 oz) Syringe 14.91
CircuitWorks® Rubber Keypad Repair Kit
The conveniently sized kit for permanently repairing flexible rubber keypads
Applies permanent conductive coating to restore electrical conductivity to worn carbon contacts Repairs tested to 500,000 keystrokes
In Stock: CW2610 Twin Pack Adhesive 10 g (0.36 oz) total 34.58
CircuitWorks® Conductive Pen
The pen dispenser which draws highly conductive silver traces, jumpers and shielding with precision and control
Quickly creates conductive silver traces without the need for soldering
Valved pen tip for easy application
Can be soldered at low temperatures
Choice of Micro Tip for fine lines or Standard Tip for wider lines.
In Stock: CW2200MTP Micro Tip 8.5 g (0.3 oz) 14.92 CW2200STP Standard Tip 8.5 g (0.3 oz) 14.92
CHEMTRONICS SWABS & WIPES
Chemtronics swabs and applicators are engineered for use in a variety of environments and applications. They are ideal for use with our cleaner degreasers, head cleaners, flux removers and other solvents for fast, precision cleaning.
FoamtipsTM 120
The highly absorbent precision cleaning swab with a wide variety of head sizes and shapes
Precision cleaning swabs with 100 ppi polyurethane foam head.
Purest medical grade foam.
In Stock: CF2050 50 pcs. Foamtips. 5-1/8" Swab Length 18.72
CottontipsTM
The economical swab designed for general cleaning applications
Soft, highly absorbent
Compatible with most solvents
100% pure pharmaceutical grade bleached white cotton head
Available single headed (CT100)
In Stock: CT200 100 Double-Headed Swabs 3.29
Chamois TipsTM
The ideal swab for cleaning audio and video heads and optical pick-ups
Synthetic chamois cloth head
Material is free of oils and residues
Flexible handle bends to clean hard-to-reach areas
The highly absorbent wipe for abrasion-free cleaning and drying of sensitive surfaces, components and equipment
Strong, textured cotton
Minimal linting
Resistant to caustic solvents and temperatures up to 302°F/150°C
For cleaning magnetic tape heads and transport mechanisms, contacts, connectors and other electronics components
In Stock: C600 300 6" x 6" Wipes 61.95 C900* 150 9" x 9" wipers 62.52
* Limited to current inventory. 7-16-02.
OpticwipesTM
The soft laboratory-grade cellulose paper designed for use on optical and other sensitive surfaces
Packaged in a Class 100 cleanroom environment
100% cellulose
Highly absorbent; high wet strength
Noncontaminating
Solvent resistant
Use to clean optical surfaces, photo processing, lab equipment and other precision instrumentation
In Stock: C920 500 9" x 9" Wipes 45.61
ChempadTM Presaturated Wipe
General purpose, presaturated lint-free cleaning wipe
Solvent evaporates completely, leaving no residue
Nonabrasive
Safe on plastics
Ideal cleaning wipe for computers, office equipment and electronic appliances
Cleans dirt, oxides, and oil from magnetic tape heads
In Stock: CP400 50 4" x 3" wipers 19.97
CHEMICALS & CLEANERS
Head CleanerTM II
The most effective cleaner for removing soils from magnetic and optical heads and disk drives
Safe for most plastics
Dries fast
Leaves no residue
Extends life – reduces head wear and improves performance
Use with Chamois Tips™ Swabs
Flammable
Ozone safe, CFC/HCFC free
In Stock: ES820L 8 fl. oz. Liquid 8.26
Label Adhesive Remover
The no-drip foaming label adhesive remover safe for use on plastics
Safe for most plastics
Safe for use on metal, glass, ceramic and most plastic surfaces
Easy-to-use – peel away label, spray foam on adhesive residue and wipe clean when foam collapses
Not recommended for use on painted surfaces
Pleasant citrus scent
Flammable
Ozone safe, CFC/HCFC free
In Stock: ES805 6 oz. Foaming Aerosol 9.42
THE FOLLOWING CLEANERS & DUSTERS ARE LIMITED TO CURRENT INVENTORY. 7-16-02.
Ultrajet® Duster
The duster with the BIGGEST blast to clean anything fast
Dusters remove dust, dirt and other dry contaminants from all kinds of surfaces including: Printed circuit boards, photographic and video equipment, computers, TV and VCR internals, keyboards electronic instruments, audio equipment, plcs, laboratory instrumentation, contacts and connectors, medical devices, and more.
Safe for most plastics
Ozone safe, CFC/HCFC free
100% ultra-pure HFC-134a leaves no residue
Nonflammable
Extra cleaning strength
In Stock: ES1020 10 oz. Aerosol 11.97 ES1020K 10 oz. Aerosol Kit. Reusable system of chrome trigger and extension tube fits refill cans, saves you money. Sprays in any direction with 36" flexible extension tube attachment. 31.20 ES1020R 10 oz. Aerosol Refill 11.40
Flux-Off®
No Clean The flux remover for cleaning no-clean flux
Nonflammable
CFC free, contains HCFCs
Dries fast
Leaves no residue
Removes flux from hard-to-reach areas
Removes encrusted flux
Test on plastics
In Stock: ES1692 14.5 oz. Aerosol 14.60
Konform® SR
The silicone coating engineered for maximum flexibility and protection from extreme temperatures and vibration damage
Safe for most plastics
Silicone coating stable from -85°F/-64°C to +390°F/199°C
High dielectric strength of 1100 volts/mil
Easily removed with Electro-Wash® Two Step (factory stocked)
Flammable
Ozone safe, CFC/HCFC free
In Stock:
CTSR-12 10 oz. Aerosol 20.42
Electro-Wash® NX
The extra-strength, nonflammable cleaner degreaser
Nonflammable
CFC free, contains HCFCs
Dries fast
Leaves no residue
Cleans hard-to-reach areas
Test on plastics
Extra cleaning strength
In Stock: ES1601 14.5 oz. Aerosol 14.22
Items shown on this page represent only our stocking items. If you don't find what you are looking for, please give us a call. Prices subject to change without notice.