fluke test equipment

FLUKE TEST EQUIPMENT & ACCESSORIES IN STOCK AT
MARSH ELECTRONICS

Fluke & Marsh are always striving to bring you the best in electronic test equipment!

IMPORTANT SAFETY RECALL ON FLUKE 170 SERIES MULTIMETERS

NOW IN STOCK! COMBO TEST EQUIPMENT KITS
NOW IN STOCK! 789 PROCESSMETER & 50S THERMOMETER
NOW IN STOCK! VOICE DATA VIDEO MICROTOOLS^TM
NOW IN STOCK! PROCESS TOOLS^TM
SCOPEMETERS Including New 190B Series	SPECIALTY METERS
MULTIMETERS	ELECTRICAL TESTERS
CLAMP-ON METERS	MEGOHMMETER
THERMOMETERS Including New 61 Infrared Model
ACCESSORIES

ATTENTION ELECTRICAL CONTRACTORS!
NEW FROM FLUKE - VOICE DATA VIDEO MICROTOOLS^TM

Today buildings require power systems plus multitudes of VDV hookups, from computer data lines to speaker wires, coax cable to security networks. And general contractors prefer dealing with single source providers that can install and test all of it. All it takes to win the power and VDV bids on the same project are the right tools, know-how and support. Partner with Fluke Networks and you're on your way.

MT-8200-31-E MicroScanner Pro^TM • $399.00

The key to your new VDV business! It's the essential all-in-one pocket sized network that tests both coaxial (RG6, RG59, etc. for CATV/CCTV) and all twisted pair cable (UTP/STP/SSTP), as well as troubleshooting wiring such as speaker wires, security networks or telephone cabling. Packed alongside your MicroScanner Pro is a compact disc with all the information you need to get started in the VDV business. The Fluke Networks "Business in a Box" includesTraining: From cabling basics and training tools to testing techniques and industry standards. Virtual Demo: Learn first-hand how to use the MicroScanner Pro with an intuitive virtual demo. Templates: Professional templates to help you provide test reports, prepare and submit bids and promote your VDV installation business.
MicroScanner Pro's new active network identification mode flashes hub ports and shows you if a network tap is operating at 10Mbps or 10/100Mbps and whether it is full or half duplex capable. It also identifies workstations by displaying PC.
Features:

Flashes hub port light
Verifies 10/100 Ethernet
Measures cable length and distance to faults via Time Domain Reflectometry (TDR) technology
Test twisted pair and coax cable
Matches (UTP or coaxial) cables to offices during adds, moves and changes
Includes: MicroScanner Pro, Wiremap Adapter, Coax Adapter (CATV type, F-connector), 9-volt Alkaline battery, and User Guide

MT-8200-31-E MicroScanner Pro Specifications:
Dimensions	5.5" x 3.25" x 1" (139.7 x 82.5 x 25.4 mm)
Battery	9-volt alkaline battery; low battery indication
Display	Custom LCD, 1.75" x .85"
Applications	Shielded (STP) and UTP cable; 75 or 50 Ohm Coaxial cable; 10 Base-T or 10/100 Base-T networks
Main tester interface	Modular 9 connector for length, 10/100 link identification, wire map, office identifier, toner; loopback interface:module 8 connector used for patch cable wiremap
Length measurement	Measures length on all 4 pairs and displays in feet or meters;max length 1500 ft (457 m)
Length calibration	User selectable NVP, NVP calculation based on known cable length (min.length 50 ft (15 m) and max. length 1500 ft (457 m)
Wiremap and Office/Identifier	Faults detected:Opens, Shorts, Reversed pairs, Swapped pairs, and Split pairs, distance maximum length: 656 ft (200/m)
Office Identifier	6 passive test plugs attached to far end (identified as #1-3 and #5-7); distance maximum length 656 ft (200 mm)
Toner frequency	User may select 1 of 4 predefined tone sequences
Toner interface	Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MicroScanner Pro during trace operations.
High voltage input/protection	The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone key sets
Wiremap Adapter	Dimensions: 2.25" x .5 x .625"
Coax Adapters	Dimensions: 3" x .63" x .58

MT8200-22-E MicroScanner Pro Kit • $549.00

Includes: MicroScanner Pro, wiremap adapter, coax adapter (CATV type, F-connector), office/room ID kit, carrying case, 9-volt alkaline battery, and User Guide

NEW

MT8200-48-E MicroNetBlink Kit^TM • $129.00

The MicroNetBlinkTM Kit allows you to quickly identify network ports and cables. The MicroNetBlink can flash hub and switch port lights to help locate cables in a busy wiring closet. The MicroNetBlink features a tone generator that with the MicroProbe (or any other inductive probe) allows you to trace cables hidden in floors, ceilings, walls, and in bundles. The tone generator sends tones using the red and black leads, RJ45, and coaxial connections. The MicroNetBlink can also verify the cables, continuity, pair condition, line polarity, and voltage in network cabling systems and modular telephone lines. The MicroProbe includes an adjustable volume control and LED for noisy work environments. Kit Includes: MicroNetBlink, MicroProbe and User Guide. The MT-8200-47-E MicroNetBlink is available separately for $59.00. The MT-8200-46-E MicroProbe is available separately for $79.00.
MT-8200-47-E MicroNetBlink features:

Flashes hub and switch port lights
Generates tracing tones on twisted pair (RJ45), coax, and bare wires
Continuity test on telco and bare wires
Ring/Tip polarity test indicator
Works with any inductive probe
Low battery indicator

MicroProbe features

Inductive plastic tip with non-conductive tip (prevents accidental shorts)
Traces and identifies wire or cable in a bundle or group without damaging cable insulation
Works with any tone generator
Adjustable volume control and a LED indicator great for noisy work environments
Lightweight and ergonomic
Low-battery indicator

MT8200-45-E MicroMapper^TM • $119.00

The MicroMapper is a small, handheld cable tester that enables network professionals to verify the integrity of Ethernet twisted-pair cabling in one quick step. The MicroMapper quickly and easily tests twisted-pair cabling, allowing you to see opens, shorts, crossed, reversed and split pairs. Simply push the TEST button, and the MicroMapper will automatically scan all wire pairs for any existing faults in your cable. The MicroMapper also includes a remote unit to easily enable one-person testing of installed cabling or patch cords. The MicroMapper includes a built-in tone generator that allows you to trace cable through walls, floors, and ceilings when used with MicroProbe (or any other inductive probe). Features:

Tests twisted-pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs
Easy-to-read fault display
Tone generator for use with MicroProbe
Shield integrity testing
Remote unit that enables one-person testing of installed cables
Small remote unit that slides into master unit for convenient and safe storage
Automatic sleep mode and power switch to decrease power consumption
Low-battery LED
One-year warranty

ACCESSORIES AVAILABLE SEPARATELY: (Click on P/N to view image)
MT8202-04-E MicroScanner Pro Carrying Case	19.00
MT8203-15-E Coax Adapter	29.00
MT8203-17-E Office/Room ID Kit	139.00
MT8203-14-E Wiremap Adapter	49.00
MT8203-16-E Bare Wire Adapter	19.00

Contact our sales department to order any of the MicroTools.

SCOPEMETERS

190C SERIES SCOPE METERS

The new ScopeMeter ® 190C Series with large, high-resolution, color screen and new Digital Persistence mode give you an even better view of complex wave-forms in the most demanding trouble-shooting applications in the field. We stock the 199C at $2995.00.
In addition to the impressive capabilities of the 190 Series, the new color models offer:

Large, High resolution color display

Digital Persistence and fast display update rate.

Dual channel, 60, 100 or 200 MHz bandwidths

Up to 2.5 GS/s real-time sampling per input

Connect&View™ automatic triggering, a full range of manual triggering modes plus external triggering

Automatic Capture & replay of last 100 Screens.

ScopeRecord mode for continuos capture of waveform sample points.

7500 points deep memory, up to 48 hours time-span.

Automatic measurements, Cursors, zoom and real-time clock

Four hours rechargeable NiMH battery pack

1000V safety certified

Independently floating isolated inputs

Includes a built-in 5000-count true RMS multimeter and a TrendPlot™ paperless recorder.

Models:	199C	196C (Non-Stock $3114.00)
Bandwidth	200 MHz	100 MHz
Max. real time sample rate	2.5 GS/s	1 GS/s
Display	144 mm full color LCD
Persistence	Digital Persistence giving analog oscilloscope like waveform decay
Max. record length …in Scope mode	1200 points per input
…in ScopeRecord mode	27,500 points per input (2 min/div. to 5 ms/div.)
Number of inputs	2 plus external/DMM input all isolated from each other and ground.
Number of digitizers	2
Independently floating isolated inputs	Up to 1000 V between inputs references and ground
Input sensitivity	5 mV/div. to 100 V/div.
Glitch capture	Up to 3 ns when using Pulse Width triggering 50 ns peak detect at 5 µs/div. to 1 min/div.
Timebase range in Scope mode	5 ns/div. to 2 min/div.
Trigger types	Connect-and-View, Free Run, Single Shot, Edge, Delay, Video, Video line, Selectable pulse width and External
Scope measurements	7 cursor measurements, 30 automatic measurements
ScopeRecord Trigger modes	Start on Trigger, Stop on Trigger
Capture last 100 screens	Automatic with Replay capability
Dual input TrendPLot	Yes with Cursors and Zoom
Memory for screens/set-ups	10 screens and set-ups
Memory for recordings	Two each can store 100 scope screens a ScopeRecord or a TrendPlot
True-rms multimeter	5000 counts, Volts, Amps, Ohms, Continuity, Diode, Temp
Safety certified (EN61010-1)	1000V CAT II / 600 V CAT III (instrument & included accessories)
Battery power	4 hr NiMH battery installed
Line power	Adapter/battery-charger included
PC & printer interface	Using optional optically isolated adapter/cable
Warranty	3 years, parts and labor

123 ScopeMeter • $1195.00

Connect & view rock-stable displays without touching the scope
Includes Connect-and-View™ hands-off operation
Lightweight, Dual-channel digital oscilloscope/digital multimeter/paperless recorder in one
Bright, high-contrast screen
600V CAT III safety rating;
Single, shielded test lead for all measurements
TrendPlot™ capabilities
Checks & troubleshoots AC & DC motor drives
Five-hour battery operation
Includes rechargeable battery pack; line voltage adapter/charger; two shielded test leads; black test lead; two hoop clips; three alligator clips; shielded banana to BNC adapter; manual.

123S KIT • $1509.00

SPECIALTY METERS

787 PROCESS-METER™ • $525.00

DMM and loop calibrator in one
Precision 1000V, 440 mA DMM
DC current source/loop calibrator
Clear LCD with backlight
4000 counts (30,000 on mA)
Externally accessible battery for easy changes
1000V overload protection on V, ohms, frequency
150V overload protection on mA, backed-up by 440 mA 1000V fuse
Meets IEC 1010 CAT III-1000V standards.

MULTIMETERS
170 SERIES METERS

175 • $169.00
177 • $194.00
179 • $214.00

Lifetime warranty
IEC 1010 CAT IV 600V safety rating
6000 count display
Auto & Manual Hold
True-RMS AC voltage and current
Min/Max/Average Frequency and capacitance capabilities
IEC 1010 Rating: CAT IV 600V / CAT III 1000V
Easy access battery door
The 179 measures temperature in °C and °F
The 177 & 179 have backlights for measurements in low visibility environments.

187 & 189 Analog/Digital Multimeters • $379.00 & $399.00

0.025% basic DC accuracy
50,000-count resolution with instant readings for detailed analyses
00kHz AC bandwidth for troubleshooting modern electronics
Internal memory for up to 3 days of stand-alone logging of measurement changes and manually storing of up to 100 different measurements. (189 only)
MIN MAX to record & timestamp values in eleapsed time.
Fast MIN MAX captures peaks to 250 µs.
Temperature readings in °C or F using optional K-type thermocouple.
Enhanced ranges such as DC voltage measurements down to 10 V, and capacitance up to 50,000 F.
Multiple reading display with bargraphs and two-level backlight.
IEC 1010-1 CAT. III 1000V & CAT IV 600V.
Includes Silicone test leads, probe holder, alligator clips batteries, CD-ROM manual, operator’s guide.
Order FlukeView Forms software separately (FVF-SC2 • $150.00). FlukeView Forms records, charts and graphs data to help you perform in-depth analysis. Easy-to-use FlukeView Forms comes with both standard and customizable forms. You can use them immediately or customize the format to fit your specific applications. Once your form is customized, it can be easily used by less experienced staff. If you prefer another brand of measurement analysis software, FlukeView Forms can easily port your data to the program of your choice.
Lifetime warranty.

110 SERIES DMMS

110 • $99.00 111 • $129.00 112 • $149.00

These little meters pack more features than some DMMs twice their size:

True-RMS AC voltage and current readings
6000 count display
Basic DC accuracy of 0.7% Min/Max/Average
IEC 1010 Rating, 600V CAT III
Manual reading hold for user convenience
Frequency and capacitance capabilities
Battery door provides battery access without breaking the calibration seal
Model 112 has a backlight for measurements in low visibility environments.
IEC CAT III 600V safety rating
3-year warranty
Includes boot, battery, TL75 test leads and manual

78 AUTOMOTIVE MULTIMETER • $279.00

AC/DC Voltage & Current readings (4-500VAC, 400mV-500VDC. 40-mA-10AAC/DC)
Temperature -40-1839°F (-40-999°C)
Dwell Angle 0-120 60-7000RPM
Duty Cycle 0.0%-99.95
Frequency 99.99Hz-99.99kHz
Resistance 400-40M
Includes holster with Flex-Stand, battery TL75 test leads, AC70 alligator clips, 3-1 bead thermocouple probe, 80AK thermocouple adapter, manual and quick reference guide.
Lifetime warranty on meter.

70 SERIES DIGITAL MULTIMETER
73-3 • $149.00

Continuity Beeper
Diode Test
3200-Count Display
Analog Bargraph
Automatic Touch Hold
Fused Current Inputs
IEC 1010 Rating
73 - 600V CAT II; 77 - 600V CAT III & 1000V CATII
Includes test leads, battery (installed), manual.

80 SERIES III

83-3 • $299.00
87-3 • $349.00
87E-3 • $369.00

All 80 Series III models now have:

Significantly improved accuracy
New displays with 205 larger digits and greater viewing angle
Backlight with on/off control
Battery access door for easy battery replacement without breaking the calibration seal
Alligator clip(s)
11 functions including: high-performance ac/dc voltage and current measurement, plus frequency, duty cycle, resistance, conductance, continuity, diode test and capacitance measurements.
Lifetime warranty.

83 Series III Includes all the features above, plus:

Improved 0.1% basic dc accuracy
Min/Max/average recording mode with Min/Max Alert™
Touch Hold® & relative modes
3.75 digit, 4000-count display
43-segment bargraph
Protective holster with Flex Stand™
Splash-proof, dust-proof case
TL75 test leads with a pair of AC70 alligator clips
IEC-1010-1 CAT III 1000V.

85 Series III Includes all the features of the 83 Series III plus:

True-rms for accurate ac measurements of non-sinusoidal signals
Improved 0.08% basic dc accuracy.

87 Series III Includes all the features of the 85 Series III plus:

Improved 0.05% basic dc accuracy
4.5-digit, 20,000-count display for detecting subtle changes
Analog pointer
250 µs peak Min/Max for capturing fast transients.

87/E III Includes all the features of the 87 Series III plus a premium test lead set which includes: extra-long, silicone insulated heat-resistant test leads; Aim-Reach™ test probes designed to reach recessed test points; black AC20 alligator clip; probe tips customized for local markets.

GENERAL PURPOSE METERS

16 MULTIMETER WITH TEMPERATURE • $139.00

Features:

Temperature and microamps for flame sensor measurement.
VAC/DC 4000mV to 600V
AAC/DC 100 µA
Resistance 400ohm to 40 Megohm
Capacitance 1000µ to 10,000 µF
Includes test leads, battery, operator’s manual, 80BK temperature accessory and holster.

One demo model available. Full warranty. Order 16-XX • $80.00.

27y dmm

27Y DMM • $349.00

3200 count display
Touch Hold
31-segment analog bar graph
Autoranging
Includes test leads, two alligator clips, spare fuse, battery, manual.

12 DMM • $109.00

The Fluke 12 is designed to support first level electrical and electronic troubleshooting. Its compact design, slide-switch & pushbutton controls allow true one-hand operation.

4000-count digital displays
Fast continuity beeper
Diode test
V Chek™ & Capacitance
1000 to 999µF Continuity
Capture & Min/Max recording

ELECTRICAL TESTERS

T3 Electrical Tester • $59.95

The new Fluke T3 voltage and continuity tester is easy-to-use and it’s built to last. There are no buttons to push or knobs to turn, just touch the test probes together and it automatically turns on. The auto-on light at the top let's you know that it’s working and will automatically turn off after approximately eight minutes of inactivity. Seven different voltage indicators will clearly differentiate between key voltage levels.

Electrical Testers with OpenJaw^TMCurrent
T5-1000 - 100V Model • $109.00 T5-600 - 600V Model • $99.95

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool -- just select volts, ohms, or current and the tester does the rest. OpenJaw^TM current lets you check current up to 100A - without breaking the circuit. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.
Features at a glance:

Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000W
Easy and accurate OpenJawTM current measurement
Continuity beeper
Compact design with neat probe storage
Rugged enough to withstand a 10-foot (3m) drop
Detachable SlimReachTM probe tips are customized for national electrical standards
Test leads accept Fluke accessory test clips
Available in 600V and 1000V models
Can stay connected much longer than solenoid type tester
Auto off mode to conserve battery life
Optional holster attaches to a belt and neatly stows test leads

VoltAlert™ 1LAC-A • $21.95

The VoltAlert™ 1 LAC makes it easy to control voltage detection — detect control voltage from 24V ac to 90V ac. Easy to use: just touch the tip to a conductor. When it glows red, you know there’s voltage present.

1AC-A1 • $20.95

Detects 90 to 600 Volts AC without metallic contact. All outer services are non-conductive for safety. 7-600 tester

7-600 • $69.95

4000-count digital display
Auto selection
Automatic readings of 600VAC/DC
400 Range/continuity beeper
TL75 test leads included
High-visibility yellow plastic housing
Simply turn on & use.
Class II for UL1244, ANSI/ISA-S82, CSA C22.2 No. 1010-1-1992, & VDE 0411.

THERMOMETERS

Now In Stock -- 61 - 8:1 RESOLUTION INFRARED THERMOMETER • $109.00

The newest addition to the Fluke family of temperature products is the Fluke 61. This infrared thermometer is the ideal tool for measuring surface temperatures of rotating, hard-to-reach, electrically live, or dangerously hot targets. For preventative maintenance tasks, the Fluke 61 will cut measurement time to almost zero with the ability to take a temperature reading in less than one second. Just press the green button and it comes alive. Targeting objects is easy with the bright laser beam. Even in the dark, the display is easy to read with its backlit screen.
61 Features:

Bright laser beam provides easy targeting
Display clearly supplies data at a glance
Shock-absorbing holster increases ruggedness
0.2 °C (0. 5 °F) resolution
Backlight illuminates the screen in the dark
Automatic sleep mode after 7 seconds extends battery life
Alkaline batteries provide 4000 typical measurements

Measurement Specifications
Range -18 C to 275 °C (0 °F to 525 °F)
Resolution 0.2 °C (0.5 °F)
Repeatability +/- 2% of reading or 2 °C (3.5 °F) whichever is greater
Accuracy +/- 3 °C (5 °F) for targets between -18 °C (0 °F) to -1 °C (30 °F) +/- 2% of reading or 2 °C (3.5 °F) for targets above -1 °C (30 °F) to 275 °C (525 °F) [with the instrument stable between 23-25 °C]
Optical Resolution 8:1 Distance to Spot Size Ratio
Emissivity Fixed at 0.95
Batteries 9 V alkaline, (included)

65 INFRARED THERMOMETER • $269.00

Available by Special Order Only
The Fluke 65 Infrared Thermometer provides quick non-contact temperature measurement in a compact case surrounded with a protective holster. Just press the green button and the Fluke 65 comes alive. Targeting objects is easy with the bright laser beam. Even in the dark, the display is simple to read with the quality backlit screen. After the measurement is done, you can scroll through the dual display to review the MIN/MAX values. The advanced microprocessor even allows you to save a temperature into memory for later reference! The Fluke 65 is the ideal tool for measuring surface temperatures of rotating, hard-to-reach, and electrically live, or dangerously hot targets. For preventative maintenance tasks, the Fluke 65 will cut measurement time to almost zero with the ability to take a temperature reading in less than one second. Try the Fluke 65 Infrared Thermometer today. With such quick response and convenience, you can't afford to operate without one!Features:

Shock-absorbing holster increases ruggedness
Bright laser beam provides easy targeting
Large dual display clearly supplies data at a glance
0.1° resolution up to 200° (1° resolution above 200°)
Quality backlight illuminates the screen in the dark
MIN/MAX provides the variation in any measurement
Store and recall any single temperature
Automatic sleep mode after 15 seconds extends battery life
Alkaline batteries provide over 4000 typical measurements
Includes C50 soft carrying case, batteries and instruction sheet

Measurement Specifications
Range	-40 to 500°C (-40 to 932 °F)
Resolution	0.1° up to 200°, 1° over 200°
Repeatability	±1° or ±1%, whichever is greater
Accuracy	Above 0°C (32 °F): ± 2°C (± 4 °F) Below 0°C (32 °F): ± 5°C (± 9 °F) (With instrument stable at 23°C ± 3°C)
Optical Resolution	8:1 Distance to Spot Size Ratio
Emissivity	Fixed at 0.95
Batteries	Qty (2) AA (included)

51-2 DIGITAL THERMOMETER • $169.00

Works with Type-K or J thermocouples
°C or F selectable
Reading HOLD button
Class III safety conformance
Includes bead thermocouple.

52-2 DIGITAL THERMOMETER • $219.00

Same as 51 except it also includes: Scan function; push-button selectable resolution; differential temperature; MIN/MAX record.

CLAMP-ON METERS

THE NEW FLUKE 320 SERIES CLAMP-ONS
321 IN STOCK AT $89.00
322 IN STOCK AT $99.00

Precise low current measurements with better than 2% basic accuracy

Safety rating: IEC 1010-2-031 600 V CAT III

Controls positioned for one-hand operation

Auto shut-off

Display hold

Includes (2) AAA batteries, test leads, instruction card, safety information and soft carrying case

Two-year warranty

General Specifications
Min/Max	No
Backlight	No
Operating Temperature	-14 °F to 122 °F (-10 °C to 50 ° C)
Battery Life	(2) AAA carbon zinc approximately 100 hours continuous automatic low battery indicator.
Safety Rating	IEC 1010-2-031600 V CAT III
Temperature De-rating	< 18 °C > 28 °C add 0.1 x specified accuracy / °C
Storage Temperature	-22 °F to 140 °F (-30 °C to 60 °C)
Display Hold	Yes
Size	Height 7.5" (19.05 cm) Width 2.5" (6.35 cm) Depth 1.4" (3.50 cm)
Jaw Opening	1" (2.54 cm)

Technical Specifications
AC Current	Range	321: 0-400.0 A 322: 0 - 40.00 A, 40.0 - 400.0 A
	Accuracy	1.8% ± 5 counts (50 - 60 Hz) 3.0% ± 5 counts (60 Hz - 400 Hz)
	AC Response	Averaging
AC Volts	Range	0-400.0V, 400-600V
	Accuracy	1.2% + 5 counts (50-400Hz)
	AC Response	Averaging
DC Volts	Range	321: Not Applicable 322:0 - 400.0V, 400-600V
DC Volts	Accuracy	321: Not Applicable 322: 1% + 5 counts
Resistance	Range	0-400.0 Ohms
Resistance	Accuracy	1% + 5 counts
Continuity		less than 30 Ohms

NEW FLUKE 330 SERIES CLAMP-ON MULTIMETERS IN STOCK

The new Fluke 330 Series redefines the clamp meter.

The Fluke 330 Series gives clamp meter a whole new meaning. Five new models offer an impressive array of innovative features with current ranges up to 1000A. Choose the model that matches the jobs you do.
Auto shut-off maximizes battery life and makes sure the meter works when you need it. The slim, easy-to-grip body fits comfortably in your hand. The narrow jaws easily squeeze in and out of the tight spots. The large, backlit display makes measurements easy to see in any light. And if you need to troubleshoot current surges that can trip motor starters, choose a model with the in-rush current function.
Includes soft carrying case, TL75 test leads, (2) AA alkaline batteries, instruction card, and safety information sheet.

MODEL	DESCRIPTION	PRICE
333	Rugged reliability at a basic price measures AC, amps, AC/DC volts, and ohms with display hold.	$119.00
334	Large display with backlight, measures AC amps, AC/DC volts, ohms, display hold and motor start-up current.	$149.00
335	A True-RMS clamp meter, large backlit display measures AC amps, AC/DC volts, ohms, display hold and motor start-up current.	$189.00
336	A True-RMS clamp meter that measures AC/DC current and volts, ohms, display hold and motor start-up current with large display and backlight.	$269.00
337	The top-of-the-line True-RMS clamp meter, large jaw measures AC/DC current and voltage, ohms, display hold, motor start-up current (in-rush), frequency, MIN/MAX capability and a large backlit display.	$299.00

1520 MEGOHMMETER • $649.00

A handy insulation resistance tester that also measures voltage and checks connections with its Lo-Ohms function.

Large, backlit LCD with analog bar graph and digital display
Three output voltages for insulation resistance testing: 250V, 500V, 1000V
Insulation resistance testing up to 4000 MW; switches automatically to voltage measurement when voltage is greater than 30V ac or 30V dc.
AC/DC voltage measurement up to 600V
Lo-Ohms function for testing connections
Last reading memory display
4 C-cell batteries for up to 5,000 tests per EN61557-2, with battery-life indicator and auto shut-off.
Autodischarge of capacitive voltage charges
Heavy duty test leads, alligator clips and test probes
Rugged, splash-proof case with impact-absorbing holster 3 year warranty