| TEMPERATURE ACCESSORIES |
|---|
| P/N | DESCRIPTION | Marsh Price |
| 80AK | Banana adapter Adapts Type K thermocouple mini-connector to dual banana plug inputs. Use with 89IV or 16. | 14.00 |
| 80BK | Integrated Temperature
Probe. Convenient one piece construction for DMMs with temperature function, K thermocouple w/standard banana jack, Measurement range: -40 to 260°C
(-40 to 500°F) | 20.00 |
| 80CKM | Mini-connector - Type K male for 80TK or 51/52. | 11.00 |
| 80CJM | Mini-connector - Type K male for 51/52. | 11.00 |
| 80PK1 | Universal bead temperature probe - Type K for 80TK or 51/52. | 13.00 |
| 80PK2A | Immerson probe for liqids/gels. 196-1090°C | 47.00 |
| 80PK3A | Surface probe for flat/convex surfaces. -0-260°C | 87.00 |
| 80PK4A | Air probe for air/gases. 196-816°C. | 64.00 |
| 80PK-7 | K-Type Industrial/Heavy Duty Surface Probe. -127 to 600ºC (-196ºF to 1112ºF).
| 189.00 |
| 80T-IR | Non-Contact Infrared
Temperature Probe. -18ºC to 260ºC (0ºF to 500ºF). | 159.00 |
| 80PK-IR | Non-Contact Infrared Temperature Probe. -18 to 260°C (0 to 500° F). | 159.00 |
| 80T-150U | Universal temperature probe for air/surface/non-corrosive liquids. | 120.00 |
| 80TK | Thermocouple module. Converts dmms with a mV range into digital thermometer. -50°C-1000°C range. | 70.00 |
| SCOPEMETER ACCESSORIES |
| HC120 | Hook Clips (Set of 2: Red, Gray) | 30.00 |
| AS190-G | Probe accessory kit for 190 Series. Gray. | 61.00 |
| AS190-R | Probe accessory kit for 190 Series. Red. | 61.00 |
| VPS100 | 10:1 volt probe set for 90B Series. 100Mhz. 1.2 meters long. | 304.00 |
| VPS200-G OR -R | 10:1 volt probe set. 200Mhz with grabber & ground lead. -G is gray, -R is red. | 154.00 |
| PM8907/803 | Power adapter/battery charger for 90B, 123. | 67.00 |
| PM9086/011 | Battery pack for 90B. | 70.00 |
| BP120 | Battery pack for 123 | 42.00 |
| RS200 | Probe hook set. Red & gray. | 82.00 |
| STL120 | Shielded test leads for 123. 2 red/2 gray. | 102.00 |
| C125 | Soft case for 123. | 26.00 |
| TEST PROBES |
| P/N | DESCRIPTION | Marsh Price |
| CO-220 | Carbon monoxide. 3-digit LCD, backlight, CO levels 0-1,000 ppm, 1ppm resolution, ±3% accuracy, MAX hold. Stand alone unit. | 289.00 |
| 80K-40 | High voltage. 40kVDC or 28kV AC RMS for Series 20/70, 8060A/8062A, 80, 860, 45. | 124.00 |
| TP1 | Flat blade test probe for 20/87E Series meters. CAT III, 1000V, 10A. | 9.90 |
| TP2 | 2mm round test probe. Works with AC70A clips, TL22/24/27 test leads. | 9.90 |
| TP20 | Industrial test. 19mm stainless steel tip for TL22/24. | 9.00 |
| TP80 | Electronic test. For high density components or boards for TL22/24. | 20.00 |
| TEST LEADS & ACCESSORIES |
| P/N | DESCRIPTION | Marsh Price |
| TL20 | Industrial leads. For electrical/HVAC applications. | 45.00 |
| TL21A | Lead extensions. Use between & instrument & test lead assembly to extend the length of leads. Silicone-insulated lead. 1.5 meters long (59”). IEC 1010-2-031, 1000V CAT III. | 18.00 |
| TL22 | Flexible leads. Shrouded right-angle connector on both ends. | 18.00 |
| TL23F | Test lead set with one right angle banana lead/one straight. 10A/1000V/CATIII UL | 45.00 |
| TL24 | Flexible leads. Same as TL22 except one end has a shrouded, straight connector. | 18.00 |
| TL26A | 5-way telecom test leads. 1 red/1 black. 10A/600V/CAT III. | 35.00 |
| TL28A | 2-way clip assembly. Silicone insulated; solid spring-loaded copper clips with a .50” jaw opening and serrated teeth and large piercing needle for penetrating larger gauge wires. | 25.00 |
| TL71 | Premium test lead set. 1 red/1black with comfort grip probes with silicone insulated right-angle leads. For 80 IV series dmms. CT III, 1000V, 10A rating. | 14.00 |
| TL75 | Hard point test lead set. 1 red/1 black with comfort grip probes with PVC insulated leads; right-angle, shrouded banana plugs. CAT III, 1000V, 10A rating. | 11.00 |
| TL80A | Basic test lead set. | 39.00 |
| TL81A | Deluxe electronic test leads set. | 99.00 |
| TL910 | Test lead set with 5 sets of replaceable tips (includes 3 sets of spring loaded gold plated and 2 sets of stainless steel replacement tips). | 40.00 |
| AC20 | Industrial test clips. Safety-grip, spring-loaded with a 20mm (.787”) jaw; 1000V rating; CAT III, one red, one black, UL1244 listed. | 23.00 |
| AC70A | Alligator clips. Gold-plated, beryllium-copper, spring contacts accept probe tips for 1.93mm to 2.13 mm. Use with TL75 & TL70A. | 8.00 |
| AC80 | Hook-style test clips. Safety-grip, spring-loaded clips with hook grip. Use with TL22/TL24 leads. | 18.00 |
| AC83 | Pin grabber test clips. Safety-grip, spring-loaded pin-grabber hooks for use with test points in close contact areas. Use with TL22 & TL24 test leads. | 22.00 |
| AC85A | Fully insulated banana-jack, large jaw alligator clips. Extra-strong teeth & spring design provide superior grip. Use with TL22 & TL24 test leads. | 12.00 |
| AC89 | Insulation piercing clips. Pierces 30-14AWG insulated wires with an extremely small, hardened pin to allow for maximum self-healing of the insulation. Use with TL22 & TL24 test leads. | 23.00 |
| CURRENT CLAMPS |
| P/N | DESCRIPTION | Marsh Price |
| I-1010 | Battery-powered Hall-effect clamp-on probe measures ac current to 600A, DC current to 1000A. Output is 1 mV per amp DC or AC. Max. conductor size: one 1.18" (30 mm) or two 0.98" (25 mm).
| 254.00 |
| I-1000S | 100mA-1000A RMS continuous, 1400A RMS peak in 3 ranges, BNC connector. | 349.00 |
| I-200 | Single range 200A AC current clamp with current output via safety shrouded banana plugs. Measuring range: 0.5 to 240A; output signal: 1 mA/A | 99.00 |
| I-410 | AC/DC Clamp-on Current. Hall-effect. 5A-400A AC/DC, 1000A DC. | 254.00 |
| 80I-400 | AC current from 1A to 400A. Output to meter is 1mA/Amp AC. (1000 to 1 division ratio.) Maximum conductor size: one 1.18" (30 mm) or two each 0.98" (25 mm). | 95.00 |
| 80I-600A | Measures AC current from 1A to 600A. Output to meter is 1mA/Amp AC. Max. conductor size 2" (50 mm) in diameter. New straight, safety-shrouded plugs.
| 129.00 |
| 80I-1000S | 1000A AC Current Probe. Measures 0.1A to 1000A AC | 395.00 |
| CASES & HOLSTERS |
| P/N | DESCRIPTION | Marsh Price |
| C10 | Holster for all Series 10 meters. Yellow. | 11.00 |
| C12A | Soft case for Series 10 meters. Yellow & Black. | 13.00 |
| C25 | Soft case for 25; 27; 21, 23, 29, 50 or 70 series meters in C70 holster; 80 Series meters in C81 holster; and PV350. One interior pocket. | 24.00 |
| C28Y | “Turtle” case for 80 Series meters with holsters and models 25 & 27. | 39.00 |
| C31 | Soft case for 30 & 32 Clamp Meters only. Vinyl soft case with one interior pocket. | 16.00 |
| C36 | Soft case for 36 Clamp Meter. | 16.00 |
| C41S | Fits 40 Series meters. Separate internal compartments for accessories, spare battery holder, yellow side panels& hand-strap for easy carrying. Can use meter while in case. | 69.00 |
| C50 | Soft case for 51/52/23/73/77/78 without holster. Vinyl case with snap-on belt loop. Holds meter, manual, leads. | 17.00 |
| C100 | Tough polypropylene case for any Fluke handheld DMM or Fluke 50 Series thermometers, except the Series 10 and 860 Series, and most Fluke DMM accessories.
| 30.00 |
| C510 | Leather meter case for Series 110/170/180/80/70/ 50 & 787. | 35.00 |
| C520 | Leather case for T3 tester. | 25.00 |
| C530 | Leather accessory case. | 25.00 |
| C550 | Premium tool bag for multiple meters/accessories. | 60.00 |
| C70G OR C70Y | Grey (C70G) or Yellow (C70Y) holster with flex stand; fits all 70/50 series & models 21, 23, &29. | 17.00 |
| C75 | Test lead case. Zippered soft case with two inside pockets. | 9.00 |
| C800 | Hard case for 70, 73, 75-77, 21, 23, 29/79, 25/79, 8060A/8062A, 83/85, 87, 51/52. | 28.00 |
| C81G | Grey holster with flex stand; fits 20/70 series & 51/52. | 16.00 |
| C90 | Soft case for 8060A/8062A, 21, 23, 29, 50 and 70 Series meters in a C70 holster. | 19.00 |
| H5 | Holster for T2 or T5 tester. | 14.95 |
| H3 | Holster with Test Lead Storage for 330 Series Clamp Meters | 19.95 |
