ADHESIVES
	QUIK STIK 10-114 • $7.70	2 pack of .5 fl. oz. tubes of clear, fast curing epoxy adhesive. 5 minutes set.
	SILICONE RUBBER ADHESIVE SEALANT 10-150 • $4.15	One-component elastomer cures to a tough, rubbery solid when exposed o moisture in the air. Designed for industrial and electronic service sealing and bonding. Use on metal, glass, most wood, silicone resin, vulcanized silicone, rubber, ceramic and more. 3 fl. oz. tube with dispensing nozzle.
	SERVICE CEMENT 10-302 • $4.92	Quick-drying, waterproof clear adhesive. Glue porous or semi-porous materials to each or to metals, plastics. 2 fl. oz. bottle with brush.
	EPOXY GLUE 10-347 • $13.25	5-hour set time. Good dielectric properties. Use to fill gaps or replace broken sections, then over-fill & sand. Package of 2 - 2 fl. oz. tubes.
	GC BOND 10-4302 • $6.59	Thermoplastic adhesive with strong bonding characteristics to most materials. Produces a waterproof, resilient, long-lasting flexible bond. Use on paper, cardboard, electronic components, circuit boards, chassis, also metals & glass. 15-30 minute drying time. 2 fl. oz. bottle with brush.
	SUPER GLUE 10-120* • $2.71	Medium viscosity formula for efficient wicking action, faster curing time. Bonds plastic, rubber or metal parts. For non-porous surfaces. .075 fl. oz. tube.
	GELWELD 19-117 • $2.13	Cyanozcrylate adhesive with super strength. Will not drip or run, fills gaps well. 0.101 fl. oz. tube.
	ELECTRONIC GRADE SILICONE SEALANT/ADHESIVE 19-155 • $4.45	One part non-corrosive, neutral cure electronic grade silicone sealant. Remains flexible from -70°F to +300°F (-60°C to +200°C). Excellent adhesive for electrical/electronic applications where corrosion is a problem. Meets Mil-A-46146A-Type 1 & FDA status/regulation #177.260. 3 fl. oz. tube.
	EPOXY PUTTY 19-348 • $5.50	Two part epoxy in a single tube. Cut off amount needed & knead together for two minutes. Sets in 20 minutes. Can be drilled & tapped. For plumbing repairs, works under water; for electrical, use in place of tape. 4 oz. tube.

SPECIALTY CHEMICALS
Image N/A	SILICONE COMPOUND 10-8101 • $5.95	Soft, inert silicone grease with excellent dielectric properties. Applicable to components in the high-voltage section of TV receivers, protects ignition systems in cars & boats, & provides corrosion resistant coating on exposed metal surfaces such as TV antenna terminals as well as general rustproofing. 1 fl. oz. tube.
Image N/A	HIGH VOLTAGE PUTTY 10-8880 • $6.22	Silicone rubber compound with excellent insulating characteristics—will not shrink. Strips 1” wide & 1/4” thick & approx. 18” long. Provides a corona & arc suppressing coating in high voltage systems for coating sharp points, edges or corners, forming gaskets & seals where a putty-like, non-hardening property is desired. (Approx. 550V/MIL Di-electric strength). 1.25 oz.
	STATIC NULL 19-1004 • $4.58	Neutralizes & prevents static electricity on test equipment, circuit boards, carpeting, clothing, cabinetry or other generators of static electricity. One application lasts for weeks. 8 oz. aerosol.

LUBRICANTS
	WHITE LITHIUM GREASE 19-2302 • $3.20	White, lithium soap base grease lubricant that provides superior lubrication and reduces friction and wear to a minimum. Suitable for use on wiping contacts. It retains consistency over a wide range of temperatures, will not oxidize or harden and provides outstanding protection against corrosion. (subs for 10-2302 Lubriplate) 1-3/4 fl. oz. tube.
Image N/A	LUBEREX 10-1206 • $2.81	Calcium stearate-based grease compound for lubricating bearings, appliances, hand tools, etc. 2 fl. oz tube
	PHONOLUBE 10-1223 • $4.18	Light grease made of polymerized oil for phonographs, record changers, TV channel & record mechanisms, etc. 2 fl. oz. tube
	POCKET OILER 10-8885 • $4.17	High grade electronic oil in a leakproof plastic barrel w/ pocket clip. Use on electronic & electrical devices, clocks, office machines, etc. 0.135 fl. oz.
	TELES-OILER 10-9410 • $3.15	Highly refined natural petroleum oil for general purpose lubrication on motors, small gears, sliding mechanisms, etc. Rust & oxidation inhibitor. Telescoping spout pulls out to 7”. 4 fl. oz. bottle.
Image N/A	CONDUCTIVE GREASE & ANTI-OXIDANT COMPOUND 19-820 • $2.67	Lithium soap base grease with zinc & graphite fillers that dissipates static charges for light load applications. Use for wire connectors & aluminum conduit joints. Guards against oxidation, improves conductivity & produces a cooler connection. 1 oz. tube.
Image N/A	GRAPHITE LUBRICANT 19-821 • $2.79	Dry powdered graphite for lubricating metal, wood, plastic & rubber — no solvents to harm plastics. 1 1/8 oz. bottle.
	SILI-SPRAY 19-600 • $3.26	Quality silicone aerosol lubricant with adjustable 3-way valve—for light, medium or heavy spray. Use on metal & wooden parts. May be painted over. 4 oz. aerosol can.

THINNERS & SOLVENTS
	RADIO-TV CEMENT SOLVENT 10-312 • $4.93	Fast acting solvent for use in speaker repair. Dissolves cement on speaker cones, spiders, frames, voice-coils, etc. Also use as a thinner for all lacquer type cements. 2 fl. oz. bottle.
Image N/A	POLYSTYRENE Q-DOPE THINNER 10-4102 • $4.58	For thinning polystyrene base coil dopes & cements, and for cementing polystyrene parts. 2 fl. oz. bottle.

COATINGS
	LIQUID TAPE 10-1762 • $6.62 & 10-1766* • $18.25	Heavy-bodied, black insulating coating—replaces insulating tape. Dries quickly to a strong pliable finish that won’t crack, peel or chip. Water & oil proof. Use outdoors on electrical terminals, connections, or wire splices. Voltage rating 700vlmil (min.) 10-1762 - 2 fl. oz. bottle with brush, 10-1766 - 16 fl. oz. bottle.
	EMI-RFI SHIELD 10-4807 • $26.58	Protects circuitry from external interference or keeps low level signals inside circuit housing. Conductive graphite coating in a tough binder that requires no undercoat. Adheres well to most plastics & glass. 12 oz. aerosol.
	RED-X CORONA DOPE 10-5002 • $6.58 & 10-5012* • $8.06	Thixotropic polyester-base red enamel for moisture-proofing & insulation of high-voltage coils & other components, rotors, field coils & coat transformers. Won’t drip or sag; excellent adhesion. Oil & waterproof. Temp. range to 220°F (104°C). 10-5002 - 2 fl. oz. bottle with brush, 10-5012 - 12 1/4 oz. aerosol.
	ACRYLIC PLASTIC 10-8665 • $4.33	Glass-like lacquer seals, protects, insulates & tarnish-proofs objects to which it is applied. High dielectric strength & resists moisture, caustic solutions & alcohols. Coats electronic components & connections, metal or art objects. 11 oz. aerosol.
	NICKEL PRINT 22-207 • $21.58	Quick-drying lacquer-based conductive paint, pigmented with powdered nickel for repair/modification of printed circuits. Conductivity 5-6W/square. 2 fl. oz. bottle.

HEAT SINK COMPOUNDS
	SILICONE (Z9) 10-8108 • $1.98 & 10-8109 • $5.75	Zinc oxide filled silicone heat sink grease. Won’t soften at elevated temps, dry out or harden. Meets Mil. Spec. C-47113. 10-8108 - 6.5 gms. avdp. tube, 10-8109 1 fl. oz. tube.
Image N/A	TYPE 44 NON-SILICONE 10-8120 • $8.25	Compounded with 100% synthetic base stocks. Excellent heat transfer efficiency, thermal stability, high flow rate; no separation/bleed/migration like silicone based greases. Meets Bellcore Spec. KS21334 & Mil. Spec. C-47113. 1 fl. oz. tube.
	SILICONE BASED HTC 10-8135 • $10.90	High Thermal Conductivity formula-benefits of conventional heat sink greases, plus exceptional stability in high humidity applications. 1 oz. avdp. syringe.

ACCESSORIES
	LINT FREE SWABS 10-277 • $4.95	30 absorbent polyurethane & cotton lint-free swabs for delicate surfaces (tape heads, etc.). Reusable if used with solvents such as TF solvent, alcohol, etc.
Image N/A	TOUCH DISPENSER BOTTLES 19-764 • $15.64	Bottles with pumps for dispensing cleaner/degreasers & defluxing solvents. Not for use with iodine, acids or bases. 19-764 - 4 oz. bottle.

SOLDER FLUX
	LIQUID SOLDER FLUX 10-4202 • $6.66	Non-corrosive liquid solder flux solution of special rosin in alcohol. No acids or chlorides & safe to use on delicate electronic equipment. 2 fl. oz. bottle.
FLUX REMOVERS
Image N/A	FLUX REMOVER & CLEANER 10-220 • $2.65	Removes all types of organic flux. Pinpoint applicator supplied. 2 fl. oz. aerosol.

PRINTED CIRCUIT PRODUCTS, DESIGN AIDS & PROTOTYPE BOARDS
PROTOTYPE BOARDS
	VERSA STRIP PHENOLIC BOARD 22-502 • $5.55	Alpha-numerical indexing, silver-plated land patterns. Predetermined short tracks for multi IC work. .1” centers x 3.5” wide x 6” long x 1/16” thick, .035” holes.
	EXPORT DESIGN PHENOLIC BOARD 22-504 • $2.92	Accommodates all types of ICs, transistor packages & passive parts. Lands & buss bars are tin-plated. .1” centers x 3 1/8” wide x 5 1/16” long x 1/16” thick.
	PRINTED STRIP PHENOLIC BOARD 22-506 • $5.25	Alpha-numerical indexing, tin-plated land patterns for positive pin identification. .1” centers x 3.5” wide x 6” long x 1/16” thick.
	EXPERIMENTER’S PHENOLIC BOARD 22-508 • $7.61	Ready-to-use copper plated printed circuit board has 550 solder tie-points, 94 five-point terminals & two 40-point buss bars on .3” centers. Prepunched holes, mounting holes. 2” wide x 6” long x 1/16” thick.
	EXPERIMENTER’S PHENOLIC BOARD 22-510 • $4.77	Ready-to-use phenolic printed circuit board has .03” punched holes. Quad land pattern. 3 3/8” wide x 6.75” long x 1/16” thick.
	PERFORATED BARE PHENOLIC BOARD 22-516 • $4.77	Ready-to-use phenolic printed circuit board has .042” punched holes, .100” spacing. 4.5” wide x 6” long x 1/16” thick.
	COPPER CLAD CIRCUIT BOARDS One ounce copper (0.0014") on base of either FR-4 (G-10) fiberglass or CEM-1 type epoxy reinforced board, 1 1/6" thick.	Copper on one side only: 22-260 - 4 x 6" • $2.68 22-264 - 8 x 10" • $7.61 Copper on both sides: 22-267 - 6 x 9" • $5.23
	ETCH RESIST INK PENS 22-220 • $2.59 & 22-222 • $2.74	Black felt tip pens for marking nomenclature & touching up photo artwork or etch resist circuits directly on the PC board or on the positive. Dries instantly. 22-220 draws lines approx. 1/32” wide. 22-222 draws lines approx. 1/64” wide.
	PC BOARD ETCHING SOLUTION 22-237 • $6.59 22-238 • $11.59 22-239 • $28.25	Ferric chloride solution for etching copper clad PC boards. 22-237 - 6 fl. oz. bottle, 22-238 - 32 fl. oz bottle, 22-239 - 1 gallon container.
	COPPER CIRCUIT TAPE 22-507 • $2.81 & 22-509 • $3.42	6’ roll of self-adhesive pure copper tape for quick repairs or circuit modification. Adheres readily to PC boards & can be soldered. Low resistance-.002” thick. 22-507 - 1/16” wide, 22-509 - 1/8” wide.
DESIGN AIDS
	CAPACITANCE SUBSTITUTION UNIT 12-102 • $72.47	Excellent for circuit development. Place wires in unit and adjust switches to determine capacitor value. Dual contact slide switches allow simple adding or subtracting to the value desired. Range: 100pF to 4.7 mFd; Precision: 10% capacitors throughout; Voltage: 200VDC non-polarized; Residual Capacitance: 100pF internal, 100pF to ground; Terminals: push type.
	RESISTANCE DECADE BOX 12-109 • $44.82	For design engineers, service techs and experimentors. All resistors +/-1% at 1/2 Watt. Helpful to determine the best value of resistors needed in experimental circuits. Values may be changed instantly in 1 ohm increments by setting switches. Range: from 1 ohm to 11,111,110 ohms in 1 ohm increments; Case: ABS high-impact & aluminum; Power Capacity: 1/2 Watt; Accuracy: +/- 1% tolerance minimum.

* All * items limited to current inventory. Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.