HAKKO SOLDERING DEVICES in Stock at Marsh

SOLDERING & DESOLDERING DEVICES & ACCESSORIES
FROM
AMERICAN HAKKO & MARSH ELECTRONICS

936-12 SOLDERING STATION

The 936 soldering station is an inexpensive, compact station that you can stack to conserve valuable bench space.

Features include:
• adjustable temperature control with lock/set screw
• temperature range 392°-896°F (200°- 480°C)
• maintains idle temperature within 1.8°F (1°C)
• ceramic heating element and senor insures rapid heat-up temperature (30 seconds) and lightning-fast thermal recovery
• Celsius or Fahrenheit temperature setting
• temperature adjusted by simply turning the dial
• slender iron handles are insulated and ergonomic-designed for ease and comfort
• accommodates large, medium or small irons
• wide selection of tips available for soldering SMD and through-hole connections
Part Number: 936-12, ESD station, includes 907 (medium-standard) iron and iron holder

Specifications
Power Consumption	60W
Output Voltage	24V AC
Temperature	200°C - 480°C (392°F - 896°F)
Temperature Stability	±1.0°C (1.8°F)
Outer Dimensions (w/o cord)	120(W) x 93(H) x 170(D) mm 4.7(W) x 3.7(H) x 6.7(D) in.
Weight (w/o cord)	Approx. 1.3 kg (2.9 lbs)

P-808-KIT • 808 DESOLDERING TOOL KIT

Handy and portable. Built-in vacuum pump--no separate station required. Thin, easy-to-hold grip. Low vibration. The simple pump makes maintenance and replacement of parts simple and inexpensive. Nozzle-ground potential difference of 2 mV or less. Nozzle-ground resistance of 2W or less. Adjustable temperature control (380-480°C/715-895°F). Includes soldering iron cover, pre-filters, ceramic paper filters, filter pipe, cleaning pins for heating element & nozzle, screwdriver & wrench in a sturdy plastic case.

Desoldering Nozzles In Stock:
A1002, A1003, A1004, A1005, A1006, A1007

Specifications
Power Consumption	70W
Heating Element	Ceramic heater
Motor Output	6.5W
Temperature	380°C - 480°C (715°F - 895°F)
Tip to Ground Resistance	Under 2 ohms
Tip to Ground Potential	Under 2mV
Vacuum Pump	Double-cylinder diaphragm pump
Vacuum Pressure	600 mmHg (24 in. Hg)
Suction Flow	10 l/min.
Dimensions (w/o Case)	170(H) x 235(W) mm (6.7(H) x 9.3(W) in.)
Weight (w/o Case)	420 g (0.9 lb.)
Standard Nozzle	A1005 (Nozzle dia. 1.0mm)

808-5 DESOLDERING TOOL

Same features as 808. Includes pre-filters, ceramic paper filters, filter pipe, cleaning pins for heating element & nozzle.

472-1 DESOLDERING STATION

A straight ESD-type desoldering tool with outstanding suction power and compact, high-capacity heating element. Short, straight, heating portion--only 1.8" from flange to tip--for increased work efficiency, prevent solder clogging. 60W high-capacity heating element is ready for use in approximately 3 minutes. ESD design eliminates possible damage to parts due to static electricity. Zero-cross temperature control and motor operation for reduced noise. Features a vacuum pump (double cylinder type).

Specifications
Output Voltage	24V AC
Power Consumption	110W
Vacuum Generator	Vacuum pump, double cylinder type
Vacuum Pressure	80 kPa (600 mmHg) (24 in. Hg)
Suction Flow	15 l/min.
Motor Output	18W
Outer Dimensions	160 x 148 x 263 mm (6.3 x 5.83 x 10.35 in.)
Weight	Approx. 4.6 kg (10.13 lbs.)

P-456-16 SOLDERING IRON

Ceramic heating element; alloy-coated iron tips. Ideal for soldering chassis, dynamos, large harnesses, transformers and other large components and assemblies.

Specifications
Power Consumption	60W
Standard Tip	A1026
Heating Element	Ceramic Heater
Max. Temperature	599°C (1110°F)
Total Length	250mm (9.8 in.)
Weight	150 g (0.31 lb.)

P-N454-JN-V12 25W SOLDERING IRON

Compact, lightweight iron with rod-type ceramic heater. Provides high insulation and shorter handle-to-tip distance for faster soldering with a minimum of motion. Typical temperature of 370°C (698°F), 200MW insulation resistance. Comes with standard N452-T-B conical tip.

Specifications
Power Consumption	25W
Standard Tip	N454-T-B
Heating Element	Ceramic Heater
Temperature Control	450°C (842°F)
Insulation Resistance	100M ohms
Total Length	192mm (7.5 in.)
Weight (with cord)	130 g (0.28 lb

P905-V12 & P915-V12 HANDY SOLDERING IRONS

Lightweight design. Handle is used as a the tip cover, allowing the iron to be put away right after use. Compact design allows for carrying in small tool kits. (Image not available.)

Specifications:
P/N	P905-V12	P915-V12
Power Consumption	30W	60W
Standard Tip	EB4	EB6
Total Length (w/o Cord)	205mm (8.07in.)	205mm (8.07in.)

P-601 IRON HOLDER

Cleans better than conventional sponges; no water required. Will not reduce tip temperature. May be used as a portable tool holder and cleaner. Non-skid base; made from temperature resistant materials. Holds many different sizes of soldering irons. (599 Tip Cleaner inserts available. Order P/N P-599-029)

P-602 IRON HOLDER

Use with Soldering Iron Numbers: N452, N453, N454 (Dash), 918, 920, 921, 922 (Mach-1), 455, 456. 3.5x4.2 inches.

P-599 SOLDER TIP CLEANER

Cleans better than conventional sponges. No water required. Will not reduce tip temperature.

P-611-1 SOLDER REEL STAND

Helps keep your work bench neater.
Solder wire draws out smoothly. Max. 1kg (2.2 lbs.) rolled solder wire can be used.

P-605M Iron Hot Sock Soldering Iron Holder

P-605M Iron Hot Sock

The Iron Hot Sock offers superior heat resistance and thermal insulation while protecting the iron; iron iron can be placed back into the toolbox immediately after the soldering work is finished. Use with N452, N453, N454, 918, 920, 921, 922, 455 irons.

Check our inventory for other Hakko Accessories!

CLICK HERE TO VISIT HAKKO’S ACCESSORY CATALOGS. ALL ITEMS SHOWN IN THEIR CATALOGS ARE AVAILABLE FROM MARSH

Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.

SOLDERING & DESOLDERING DEVICES & ACCESSORIES FROM AMERICAN HAKKO & MARSH ELECTRONICS