Littelfuse fuses in stock at Marsh

LITTELFUSE FUSES IN STOCK AT
MARSH ELECTRONICS

Listed below are our in-stock series of Littelfuse fuses & accessories. Click on the Series Number to view complete specifications or on Check Inventory to check stock. If you have any questions or cannot find what you are looking for, please call 800-877-8919, or e-mail us.

MIDGET FUSES: SUPPLEMENTARY OVERCURRENT PROTECTION

Series: BLF, BLN, BLS, FLA, FLM, FLQ, KLK, KLKD

BLF SERIES FAST ACTING 125/250VAC MIDGET FUSES
Laminated tube. Suitable for control circuit & instrument protection in dry locations. Cartridge mounting. 250VAC: .5-15A; 125VAC: 20-30A voltage rating. 10,000A RMS symmetrical interrupting rating. Approvals: Standard 248-14; UL Listed, CSA Certified.Dimensions: 13/32" x 1.5". Check Inventory

BLN SERIES FAST ACTING 250VAC MIDGET FUSES
Fiber tube, 250 volt for military applicatins and control cuircuits. 250VAC. 10,000A RMS symmetrical interrupting rating. Approvals: Standard 248-14; UL Listed, CSA Certified, Versions avilable to meet MIL-F-15160/9, QPL F09A.Dimensions: 13/32" x 1.5". Check Inventory

BLS SERIES FAST-ACTING 250/600VAC MIDGET FUSES
Space-saving, low-cost protection or street light, metering, control and electronic circuits. 250VAC: 6-10A; 600VAC: 2/10-5A voltage rating. 10,000A RMS symmetrical interrupting rating. Approvals: Standard 248-14; UL Listed .5-5A, CSA Certified .5-5A.Dimensions: 13/32" x 1 3/8". Check Inventory

FLA SERIES SLO BLOW MIDGET FUSES
FLA fuses are 125 volt, pin-indicating time-delay fuses for protection of control circuit transformers, solenoids, and other circuits with high inrush currents. Metal indicating pin “pops-out” when fuse opens. Pin gives visual indication of open fuse. Use FLA fuses in conjunction with special fuseblocks to operate mechanical signal switches or energize alarm circuits. Fuses rated 12A and above have dual-tube construction. 125 VAC voltage rating. 10,000A rms symmetrical interrupting rating. Approvals: Standard 248-14; UL Listed; CSA Certification Pending. Dimensions: 13/32" x 1-1/2". Check Inventory

FLM SERIES SLOW BLO TIME-DELAY 250 VAC MIDGET FUSES
Use FLM 250 volt time-delay fuses to protect control circuit transformers, solenoids, and other circuits with high inrush currents. Excellent for supplemental protection of small motors. For motor branch-circuit protection, See Class CC fuses above. 10,000A rms symmetrical interrupting rating. Approvals: Standard 248-14; UL Listed. Dimensions: 13/32" x 1-1/2". Check Inventory

FLQ SERIES SLO BLOW TIME-DELAY MIDGET 500VAC FUSES
These 500 volt time-delay fuses provide excellent supplemental protection of control power transformers, solenoids, and circuits with high inrush currents. UL and CSA 500 volt ratings permit use on 480 volt circuits. FLQ fuses also provide supplemental protection to small motors. For motor branch-circuit protection, see Class CC fuses. Approvals: Standard 248-14; UL Listed; CSA Certified. Dimensions: 13/32" x 1-1/2". Check Inventory

KLK SERIES FAST-ACTING 600VAC MIDGET FUSES
Fast-acting, high-interrupting capacity, current-limiting type fuse. Especially suited for control circuits, street lighting, H.I.D. lighting, computers, and other applications without high inrush currents. Approvals: Standard 248-14; UL Listed 3/10-30A; CSA Certified 3/10-30A. Versions available to meet MIL-F-5160/60, QPL F60C. Check Inventory

KLKD SERIES FAST-ACTING 600 VAC/DC MIDGET FUSES
Fast-acting, high-interrupting capacity, current-limiting type fuse. Especially suited for DC control circuits, street lighting, H.I.D. lighting, computers, and other applications. 600 VAC/DC voltage rating. 100,000A AC rms symmetrical; DC: 10,000A DC interrupting rating. Approvals: Standard 248-14; UL Listed 3/10-30A. Dimensions: 13/32" x 1-1/2". Check Inventory

CLASS RK5 FUSES

Series: FLNR, FLSR, NLN, NLS

FLNR/FLSR SERIES SLO BLOW CLASS RK5 250/600VAC FUSES
FLNR/FLSR series fuses have been the superior UL Class RK5 dual-element time-delay fuses, and are the most widely used class of fuses. Dual-element, time-delay, 1/10 – 600A. Provide excellent protection for all types of circuits especially those containing motors. APPLICATIONS: Service entrance switches; switchboard main and feeder switches; motor control center mains and motor branch circuits; individual fused combination motor controllers; distribution panelboards; industrial control panels; protection of fully-rated panelboards and loadcenters; and all general purpose circuits. FLNR: 250VAC/125VDC FLSR: 600VAC/300VDC voltage rating. 200,000A AC rms symmetrical & 20,000A DC interrupting rating. Approvals: Standard 248-12, Class RK5; UL Listed; CSA Certified; MSHA 300 Volt Listing (FLSR); QPL: Federal Specification WF-1814. Check Inventory

NLN/NLS SERIES CLASS K5 FUSES
250/600 VAC; ONE-TIME; 1 – 600A. * NLKP series available only in those amperages preceded NLN and NLS series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50,000A. They replace all Class H fuses which have only a 10,000 ampere interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. Voltage Rating: AC: 250 Volts (NLN, NLKP); 600 Volts (NLS). DC: 250 Volts (NLN); 400 Volts (NLS 35 – 60A); 500 Volts (NLS 8 – 15A); (NLS 225 – 600A); 600 Volts (NLS 1 – 7A); (NLS 20 – 30A); (NLS 70 – 200A). 50,000A AC rms symmetrical (NLN/NLS); 20,000A DC (NLN/NLS 1 – 60A); 50,000A DC (NLN/NLS 70 – 600A) interrupting ratings. Approvals: Standard 248-9, Class K5; UL Listed; CSA Certified (Excludes NLN 15-60A). Check Inventory

SLC SERIES CLASS G FUSES
480 VAC, 600 VAC; Medium Time-Delay; 1/2 – 60A. Compact Class G fuses were the first fuse series to approach midget fuse dimensions and meet NEC requirements for branch-circuit protection. The unique dimensions of SLC series Class G fuses prevents insertion of lower voltage fuses in Class G fuse holders. The fuse's varying length prevents insertion of higher ampere rated fuses in fuse holders designed for lower ampere ratings. Class CC fuses are replacing Class G fuses in many new designs. Voltage Ratings: 600Volts AC (1/2 – 20A); 480 Volts AC (25 – 60A). 100,000A rms symmetrical interrupting ratings. Approvals: Standard 248-5, Class G; UL Listed; CSA Certified; QPL: Federal Specification No: WF-1814. circuits. Check Inventory

JLLN/JLLS POWR-T^™ CLASS T FUSES
300/600 VAC, Fast-Acting, 1 – 1200A. Space saving POWR-T™ fuses are the most compact fuses available in ratings above 30A — less than one-third the size of comparable Class R fuses. Used in inductive circuits, the ampere rating of POWR-T fuses must be increased to prevent opening on inrush currents. In such instances, POWR-T fuses may provide only short circuit protection. Applications: Protection of individual electric services and meters; main switches. 300VAC (JLLN); 600VAC (JLLS); 125VDC (JLLN 110 – 1200A); 300VDC (JLLS) voltage rating. 200,000A AC rms symmetrical; 20,000A DC (JLLN 110 – 1200A), (JLLS 1 – 1200A) interrupting rating. Approvals: AC: Standard 248-15, Class T; UL Listed: JLLN/JLLS (1 – 800A); UL Recognized: JLLS (900 – 1200A); CSA Certified: JLLN/JLLS (1 – 600A). DC: UL Listed: JLLN (110 – 1200A); Littelfuse Self-certified: JLLS 300 VDC. Check Inventory

JTD ID SERIES POWR-PRO^® CLASS J FUSES
600 VAC; Time Delay; 8/10 – 600A. The Littelfuse® POWR-PRO^® JTD ID Indicator Class J fuse provides visual blown fuse indication and maximum protection in a compact package. The compact Class J package was designed specifically for circuits where space is at a premium. The current limiting time delay JTD ID offers a patented true dual-element design that is ideal for use in circuits with high inrush currents. Superior performance characteristics of JTD_ID Indicator fuses reduce nuisance fuse opening and the blown fuse indication reduces downtime and increases safety. No fuse testing required. Machine operators can immediately determine that there is an open fuse and request maintenance personnel to bring the proper replacement. 600VAC voltage rating. 200,000A rms symmetrical; 300,000A rms symmetrical (Littelfuse self-certified) interrupting ratings. Applications: Fused combination motor controllers; motor control centers; transformer protection; protection for UL Listed series-rated molded case circuit breaker panels; general purpose circuits. Approvals: AC: Standard 248-8, Class J; UL Listed; CSA Certified. DC: Littelfuse self-certified. Check Inventory

LITTELFUSE CLASS CC FUSES
Voltage Ratings: AC: 600 Volts. DC: 250 – 500 Volts (CCMR)†; 300 Volts (KLDR); 300 Volts (KLKR)
Interrupting Ratings: AC: 200,000A rms symmetrical. DC: 20,000A
Ampere Range: CCMR:2/10 – 60A; KLDR: 1/10 – 30A; KLKR: 1/10 – 30A
Approvals: AC: Standard 248-4, Class CC; UL Listed 1/10-30 Amps; Standard 248, Class CD; UL Listed 35-60 Amps; CSA Certified 1/10-60 Amps; DC: Littelfuse Self-certified.

CCMR SERIES FAST ACTING 600VAC CLASS CC FUSES
For space-saving protection of motor circuits up to 40HP. Cartridge mounting. Check Inventory

KLDR SERIES CLASS CC SLO BLOW FUSES
KLDR fuses are time-delay fuses specifically designed for the protection of control transformers, solenoids and similar inductive components with high magnetizing currents during the first half-cycle. They closely match most control power transformer characteristics, which permits the fuses to be sized in accordance with the latest revisions of UL 508 (Industrial Control) and UL 845 (Motor Control Centers). Applications: Small transformer protection Check Inventory

KLKR SERIES CLASS CC FAST ACTING FUSES
KLKR series Class CC fuses are fast acting fuses intended for general purpose branch circuit protection. Their compact size, fast-acting overload response, and their highly current limiting design make them ideal for use in OEM equipment and control panels. Solid-state devices such as SCRs and other electronic equipment generally require fast-acting protection. Check Inventory

SEMICONDUCTOR FUSES

Series: L15S, L25S, L50S
150/250/500/600/700 VAC; Very Fast-Acting; 1 – 1000A. Designed specifically for supplementary protection of semiconducting devices such as silicon controlled rectifiers (SCR’s), diodes, thyristors, triacs, transistors, and similar solid-state devices. These devices are used in power equipment including variable speed drives, power rectifiers, UPS systems, DC power supplies, and in a wide range of electronic equipment. May be used wherever extremely fast-acting, current-limiting fuses with no time delay are required. semiconductor fuses may be used to provide supplementary protection in UL listed equipment. Voltage Ratings: L15S: 150 V AC/DC (1 – 60A); 150 VAC (70 – 1000A); 100 VDC (70 – 1000A). L25S: 250 V AC/DC (1 – 200A); 250 VAC (225 – 800A); 200 VDC (225 – 800A). L50S: 500 VAC/450VDC. L60S: 600 VAC. 200,000A AC rms (L15S series 100,000A); DC: 20,000A. Approvals: UL Recognized under the Components Program and CSA Recognized under the Component Acceptance Program; UL; CSA. Check Inventory

SLO BLO & CARTRIDGE TYPE FUSES

216 SERIES 5 X 20 MM FAST-ACTING CARTRIDGE TYPE FUSE
Designed to International (IEC) Standards for use globally. Meets the IEC 60127-2, Sheet 1 specification for Fast Acting Fuses. Available in Cartridge and Axial Lead Form, in ratings of 0.050 to 10A. High breaking capacity. 1500A interrupting rates. Check Inventory

217 5x20mm Fuses

217 SERIES 5 X 20 MM FAST-ACTING CARTRIDGE TYPE FUSE
Designed to International (IEC) Standards for use globally. Meets the IEC 60127-2, Sheet 2 specification for Fast-Acting Fuses. Available in Cartridge and Axial Lead Form. Available in ratings of 0.032 to 10A. Check Inventory

235/236 5x20mm Fuses

235/236 SERIES 5 x 20 mm FAST ACTING TYPE FUSE
Designed to UL/CSA/ANCE 248 Standard; approved by MITI from 1-5A. Available in Cartridge and Axial Lead Format. Available in ratings of 0.100 to 6A. 1A 10,000A at 125 VAC; 35A at 250 VAC; 1.25A-3.5A 10,000A at 125 VAC; 100A at 250 VAC; 4A-10A 10,000A at 125 VAC interrupting ratings. 235 Series is Cartridge Type. 236 Series is Axial Lead. Check Inventory

218 SERIES 5 X 20 MM SLO-BLO CARTRIDGE TYPE FUSE
Designed to International (IEC) Standards for use globally. Meets the IEC 60127-2, Sheet 2 specification for Fast-Acting Fuses. Available in Cartridge and Axial Lead Form. Available in ratings of 0.032 to 10A. Check Inventory

239 SERIES 5 X 20 MM SLO-BLO TYPE FUSE (TIME LAG FUSE)
Designed to UL/CSA/ANCE 248 Standard; approved by MITI from 1-5A. Available in Cartridge and Axial Lead Format (Series 238). Available in ratings of 0.200-5A. 1A 10,000A at 125 VAC; 35A at 250 VAC; 1.25A-3.5A 10,000A at 125 VAC; 100A at 250 VAC; 4A-10A 10,000A at 125 VAC interrupting ratings. Check Inventory

2AG FAST-ACTING TYPE FUSES SUBMINIATURE GLASS BODY

Series: 224, 225
The 2AG Fast-Acting fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. 0.1-10A, 125-250V. 0.1–10A 10,000A at 125 VAC; 0.1–1A 35A at 250 VAC; 1.5–3.5A 100A at 250 VAC interrupting ratings. Approvals: UL, CSA; 224 Series approved by MITI from 1-5A. Applications: Test and Measurement Equipment, Power Supplies, Ballast Protection, Military Components. Check Inventory

2AG SLO BLO TYPE FUSES SUBMINIATURE GLASS BODY

Series: 229, 230
The 2AG Slo-Blo® fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available..25-7A, 125-250V. 0.25–3.5A 10,000A at 125VAC; 4–7A 400A at 125VAC; 0.25–1A 35A at 250VAC; 1.25–3.5A 100A at 250VAC interrupting ratings. Approvals: UL, CSA (through 3.5A); recognized under the Components Program of Underwriters Laboratories from 4-7A; 229004 & 229005 approved by MITI; 230001- 230005 approved by MITI. Applications: Test and Measurement Equipment, Power Supplies, Ballast Protection, Military Components, Telecommunications, Overcurrent. Check Inventory

251 Pico II Fuses

251 SERIES PICO II VERY FAST-ACTING AXIAL LEAD TYPE FUSE
The PICO^® II very fast-acting fuse is designed to meet an extensive array of performance characteristics in a spacesaving subminiature package. Available in 1/16-15A, 32 & 125V. 300A at rated voltage VDC; 50A at rated voltage VAC interrupting ratings. Materials: Encapsulated, Epoxy-Coated Body; Solder Coated Copper Wire Leads. Approvals: Recognized under the Components Program of UL and certified by CSA; approved by MITI from 1-5A. Applications: Military Components, Aerospace, Business Equipment, Computers, Consumer Electronics. Check Inventory

263 Pico II Fuses

263 SERIES PICO II 250 VOLT VERY FAST-ACTING TYPE FUSE
The PICO^® II 250 Volt Fuse is a specially designed axial leaded fuse that achieves a 250 volt rating in a small package. Available in 1/16-5A, 250V. 50A at 250 VAC interruping rating. Approvals: UL, CSA. Check Inventory

273/279 Microfuses

273/279 SERIES MICROFUSE VERY FAST-ACTING PLUG-IN TYPE FUSE
Developed originally for the U.S. Space Program, MICRO fuse provides reliability in an extra compact design. The MICRO fuse is available in plug in or radial lead styles and a complete range of ampere ratings from 1/500 to 5A to suit a wide variety of design needs. 10,000A at 125 VAC/VDC interrupting ratings. Approvals: UL, CSA. Applications: Military components. Check Inventory

307 SFE Fuses

307 SERIES SFE FAST-ACTING CARTRIDGE TYPE FUSE
Available in 4-30A, 32V. Approvals: UL. Check Inventory

311/312/318 3AG Fuses

311/312/318 SERIES 3AG FAST-ACTING CARTRIDGE TYPE FUSE
Glass body. A standard for cost-effective reliability and performance in circuit protection, the 3AG fuse satisfies a broad range of application requirements. Available in 1/32-35A, 32 & 250V. Approvals: Listed by UL and Certified by CSA through 30A; 1/100 –10A listed to UL 248-14 (UL 198-G); 12–30A listed to UL 275. Check Inventory

313/315 3AG Slo-Blo Fuses

313/315 SERIES 3AG SLO-BLO CARTRIDGE TYPE FUSE
Glass body. A standard for cost-effective reliability and performance in circuit protection, the 3AG fuse satisfies a broad range of application requirements. Available in 1/100-30A, 32 & 250V. Approvals: Listed by UL and Certified by CSA through 8A; approved by MITI from 1-5A. Applications: Military components. Check Inventory

314 3AB Fuses

314 SERIES 3AB FAST-ACTING CARTRIDGE TYPE FUSE
Ceramic body construction permits higher interrupting ratings and voltage ratings. Ideal for applications where high current loads are expected. Available in 1/8-30A, 250V. Approvals: Listed by UL and Certified by CSA through 15A at 250 VAC/125 VDC; recognized under the Components Program of UL from 20-30A, 250 VAC/125 VDC; approved by MITI from 10-30A. Check Inventory

322 3AB Fuses

322 SERIES 3AB VERY FAST-ACTING CARTRIDGE TYPE FUSE
For protection of silicon controlled rectifiers and similar solid-state devices. Available in 1-30A, 62 & 250V. Approvals: Recognized under the Components Program of UL from 1-10A at 250 VAC/65 VDC, 12 -30A at 65 VAC/VDC. Check Inventory

326 3AB Slo-Blo Fuses

326 SERIES 3AB SLO-BLO CARTRIDGE TYPE FUSE
Ceramic body construction permits higher interrupting ratings and voltage ratings. Ideal for applications where high current loads are expected. Available in 1/10-30A, 125 & 250V. Approvals: Listed by UL from 1/4-10A; certified by CSA from 1/4-30A. Applications: Test and Measurement Equipment,Power Supplies, Military Components. Check Inventory

257 SERIES ATO^® FAST ACTING BLADE FUSES
Standard Vehicle circuit protection. Designed and originated by Littelfuse for the automotive industry, the ATO^®fuse has become the original equipment circuit protection standard for foreign and domestic automobiles and trucks. Readily identifiable and easily replaced, this fuse can be specified for a variety of low voltage electronic applications. Available in 1-40A, 32V. Approvals: Listed by UL (1–40A); Certified by CSA (3–30A). Check Inventory

ACCESSORIES

FBDIN1 Class CC & Midget Fuse Block DIN Rail Adapter • $1.68
FBDIN1 is for use with 30A Midget, Class CC and Class G fuse blocks. The patented design permits snap-mounting of Littelfuse Class CC and Midget 30A fuse blocks directly to standard and low profile 35mm symmetrical “hat” and 32mm asymmetrical DIN rails. Adapters snap securely to Littelfuse fuse blocks and to DIN rails without tools. They may be readily removed from rails by lifting the disconnect tab. Check Inventory

CLASS CC/CD AND MIDGET FUSE BLOCKS
30A 600VAC. Dielectric strength: 1200 volts minimum. Clip/terminals: Tin-plated copper alloy. Box lug: Copper. Screw and captive pressure plate: Zinc-plated steel. Base: Thermoplastic. UL 94VO flammability rating. Approvals: Class CC: UL Listed; Midget: UL Recognized; Class CC/Midget: CSA Certified. Use with fuses: Class CC Blocks Midget Blocks-KLDR BLF FLM KLKR BLN FLQ CCMR BLS KLK FLA KLKD KLQ. Class CD Blocks-CCMR. Check Inventory

P/N	Marsh Price
L60030C-1PQ	4.74
L60030M-1C	5.68
L60030M-1PQ	3.37

245 SERIES SHOCK SAFE PANEL MOUNT TYPE FUSEHOLDER FOR 2AG
Newest and smallest of the 2AG fuseholder family. Popular screwdriver slot knob style provides low profile which complements modern panels. Shock-Safe design eliminates any possibility of electrical shock, per IEC Standards 60127 and 60065. Check Inventory

342 Panel Mount Fuseholder

342 SERIES STRAIGHT BOTTOM PANEL MOUNT TYPE FUSEHOLDER FOR 3AG FUSES Check Inventory

Fluted Knob	Terminal	Marsh Price	Knurled Knob	Terminal	Marsh Price
342014	Solder	3.62	342012	Solder	2.07
342038	3/16" Q.C.	2.54	342058	3/16" Q.C.	2.38
342838	1/4" Q.C.	2.54	342858	1/4" Q.C.	2.54

344804 BLOWN-FUSE LAMP INDICATING SNAP MOUNT TYPE FUSEHOLDER FOR 3AG • $13.62
Standard body and bezel color is black; otherbezel colors available on special order. Rated at 15 amps at 120V. Approvals: UL Components & CSA certified. Check Inventory

1/4" Q.C. Terminals	Lamp Type	Lamp Voltage	Lamp Current	Resistor	Lens Color
Yes	Neon	120	1.2Ma	Yes	Clear

348857 LOW PROFILE SNAP MOUNT TYPE FUSEHOLDER FOR 3AG FUSES • $3.59
Rated at 15 amps for any voltage up to 250 volts. Approvals: UL Components & CSA certified. 1/4" Q.C. Terminals, White Bezel Color, Black Cap Color. Check Inventory

571 Shock Safe Fuseholders

571 SERIES SHOCK SAFE PANEL MOUNT TYPE FUSEHOLDER FOR MIDGET FUSES
Two panel mount fuseholder designs are available for supplementary or Class CC branch circuit protection. Class CC fuses have a rejection feature on one end cap which mates with the rejection feature of Littelfuse Class CC fuse blocks and fuseholders to prevent the installation of fuses with lower voltage ratings or interrupting ratings. Check Inventory

P/N	Bottom Terminal	Fuse Length Range	Marsh Price
571007P	Straight	113/32" – 11/2"	8.95
571027P	Straight	15/16" – 13/8"	7.31

354 SERIES OMNI-BLOK FUSE BLOCK FOR 3AG FUSES
A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The unique design permits self-alignment of clips to fuse cap. This, plus a one-piece clip/terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips. With the exception of the two-pole unit, multiple pole units may be broken apart to obtain desired number of poles. Check Inventory

P/N	# Poles	Terminals	Marsh Price
354012GY	12	Solder	8.40
354101GY	1	Solder	.59
354912GY	12	NEMA 1/4" Q.C.	11.83

359 SERIES HIGH CURRENT SCREW TERMINAL FUSE BLOCK FOR 3AG
Laminated Base Type. Rated for currents up to 30A (beryllium copper clips). Check Inventory

P/N	# Poles	Width	Marsh Price	P/N	# Poles	Width	Marsh Price
359001	1	7/8"	5.13	359002	2	1.69"	8.76
359003	3	2.59"	13.87	359004	4	3.50"	15.98
359006	6	5.31"	24.10	359008	8	7.12"	35.10
359010	10	8.94"	36.32	359012	12	10.75"	52.68

FUSE CLIPS FOR 1/4" DIAMETER FUSES RIVET/EYELET MOUNT SOLDER TYPE
Check Inventory

P/N	DESCRIPTION	Marsh Price
105002	Earless, midget, spring-brass nickel plated, for 13/32" fuses	.69
109002	Earless, NEC 30–60 amp, spring-brass nickel plated, for 13/16" fuses	1.69

FUSEHOLDERS Check Inventory

150274	For use with 2AG & 5 x 20mm fuses. Max. current ratings are 5A at 32V for the 2AG size fuses & 10A at 32V for the 5 x 20mm size fuses. Black Thermoplastic body. Brass Terminals. 16 Awg size; nominal o.d. 0.104" wire; red. Lead Pull Test: Will withstand 10 lb. pull. Ambient Temperature: –40°C to +80°C.	3.08
150145	Heavy-Duty Bayonet Knob Universal Inline type. Supplied with 15" loop of #14 AWG red vinyl insulated wire & three springs in different lengths to accommodate SFE sized fuses.	4.62
155100	Twist-Lock Universal In-Line Type. Supplied with 8" loop of #14 AWG red vinyl insulated wire and two springs in different lengths to accommodate SFE sized fuses.	2.37

We also have discontinued & obsolete fuses, fuse holders, fuse blocks and fuse pullers from Littelfuse.

Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.