PROGRESSIVE ELECTRONICS TELEPHONE & CABLE TRACING EQUIPMENT IN STOCK AT
MARSH ELECTRONICS
711K Tone & Probe Kit • $99.50
The new 77GX Tone Generator incorporates a host of features including microprocessor controlled circuitry for increased reliability, three selectable tone outputs for multiple line identification, two-line polarity indication for fast outlet checks and selectable power outputs for use on open or shorted pairs. The new 200GX Inductive Amplifier features a simple, one-button operation and comfortable, ergonomic design. The adjustable volume control, LED visual signal strength indication, and powerful speaker make the 200GX ideal for noisy environments. To provide a single solution for the professional, Progressive has developed the 711K - Professional Tone and Probe Kit combining the 77GX Tone Generator and 200GX Inductive Amplifier in a rugged carrying case. Features include:
- Fast, Accurate Wire Identification
- Rugged Industrial Design
- Sends Tone to Identify Wires
- Three Selectable Tone Outputs
- Two-line Polarity Indication
- Continuity Test
- Adjustable Volume Control
- Visual Signal Strength Indication
- Powerful Speaker for Noisy Environments
- Recessed Telephone Test Set Connectors
- One Year Warranty
PE810 TELE-MATE BUTT SET • $116.67
The new Tele-Mate is ideal for technicians needing to verify the quality of a new wiring installation quickly and accurately. Tele-Mate’s compact design and rugged belt clip make it easier to carry and operate than conventional test sets and the tough plastic outer molding is designed to withstand the rigors of daily use in the field. Despite its compact size, the Tele-Mate incorporates a host of features that make it among the best values in its class.Standard features include:
- Headset for Hands-free Operation
- Adjustable Volume
- Built-in Ringer
- Tone/Pulse Dialing
- Last Number Redial
- Line Polarity Indication
- Microphone Mute
- Data Safe Monitor Mode
- Rugged Design for Demanding Use
- Replaceable Premium Cordset with Telco-Style Clips
| SPECIFICATIONS: | |
|---|---|
| LINE ELECTRICAL: | |
| Maximum Loop Length: | 5000. |
| Minimum Loop Current: | 10mA |
| Maximum Off-Hook Resistance (Handset & Headset): | 300 |
| Minimum DC Resistance in Idle & Monitor Mode: | 5M. (20mA) at 100Vdc |
| Minimum AC Impedance: | 100k. at 1kHz |
| DIALING: Tone and Pulse Dial | |
| Pulse Dial: | 10 pulses per second, 60% break, -3dBm nominal DTMF/tone level |
| Flash/Timed Break Recall: | 600ms (selectable 100, 300, 600ms) |
| Memory Dialing: | 32-digit last number redial |
| Programmed Pause Duration: | 2 seconds per key press |
| BATTERY: 9V alkaline battery | |
| Low Battery: | Red LED indicates 2 hours of continuous monitor operation remaining |
| Auto Power Shut-Off When No Line DC: | 5 minutes |
| ENVIRONMENT: | |
| Operating Temperature: | 23°F to 104°F (-5°C to 40°C) |
| Storage Temperature: | -4°F to 158°F (-20°C to 70°C) |
| Durability: | High Resistance to Impact |
| WARRANTY: One Year Warranty | |
PE940 Telephone Test Set With Amplified Speaker • $230.00
Features:- Award Winning Waterproof Design (IEC 60529 IP67 Rated)
- Tone and Pulse Dial
- Built-In Ringer with Adjustable Ring Tones
- 10 Number Speed Dial Memory (32 Digits Each)
- Last Number Re-Dial
- Precise Hook Flash
- Microphone Mute
- Easy to Use Talk and Monitor Keys
- Audible and Visual Mode Indicators
- Polarity Test in Any Mode
- Low Battery Indicator
- Drop Tested to 20 Feet
- Digital Safe Monitor
- Automatic Ground Start Operation (optional ground start wire kit available)
- Three Year Warranty
- Unique 'Quick Release' Belt Clip
- Premium Cordset with Bed-of-Nails & Piercing Pin Clips
| SPECIFICATIONS: | |
|---|---|
| LINE ELECTRICAL | |
| Maximum Loop Length | 5,000. |
| Minimum Loop Current | 10mA |
| Maximum Off-hook Resistance | 300 |
| Minimum DC Resistance in Idle, Monitor and Lockout | 10M. at 300 VDC |
| AC Impedance in Monitor | 400k. at 1 kHz |
| Line High-DC Lockout Range | 120 VDC minimum; 450 VDC maximum |
| DIAL SIGNALING: Pulse (rotary) Dial | |
| Pulse Rate | 10 pulse per second |
| Break Proportion | 60% |
| Break Interval Resistance | 1M. minimum |
| Inter-digital Interval | 800µs |
| Dual-tone Multifrequency (DTMF) Level | -3 dBm nominal |
| Flash (Time-break Recall) Duration | 600ms nominal |
| Speed Dial Capacity | |
| Stored Numbers | 10 |
| Stored Number Length | 32 digits per storage number |
| Programmed Pause Duration | 4 seconds per key press |
| BATTERY OPERATION: 9 VDC Alkaline Battery | |
| Operating Life | 3 months of typical use or 30 hours of continuous loudspeaking |
| Auto Battery Saver (with warning tone) | |
| Power Off When No Line DC | 90 seconds |
| Power Off With Line DC | 20 minutes |
| ENVIRONMENT | |
| Operating Temperature | -34°C to 60°C; -29°F to 140°F |
| Storage Temperature | -50 °C to 75°C; -58°F to 167°F |
| Dust and Water Resistance | IP67 per IEC 60529 |
| Physical Shock | TRY-TSY-000344; Bellcore |
AT SERIES ADAPT TONER TONE GENERATORS
The AT Series AdapToner tone generators make it simple to test any configuration of pairs in both 6 and 8 position modular jacks and plugs. Combining the features of Progressive tone generators with a modular breakout adapter allows technicians to test continuity and polarity, send tone and supply talk battery to any pair in any configuration. With both a modular plug and jack on each unit, in-line testing is also made simple.
AT8 AdaptToner Modular Break-Out Tone Generator • $63.00
8 position "snag proof" modular plug 8 position jack with protective cover tone, continuity & talk battery supply using alligator clips Selectable solid/warble tone signal Quick reference guide with common & wiring configurations Weather resistant design.
AT8K Tone & Probe Kit • $138.00
Includes the AT8 and the 200EP Inductive Amplifier in a 700C Carrying Case77 SERIES TONE GENERATORS
By applying a tone signal to a wire pair or single conductor, and using an inductive amplifier probe, the tone generator permits technicians to identify that conductor within a bundle, at a cross-connect point or at the remote end. These Generators can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coax cables, de-energized AC wiring, etc. All 77 Series Tone Generators provide the four basic functions of tone signal, continuity testing, talk battery supply and line polarity confirmation.IN STOCK:
77HP • $33.00
- 24" test leads (clips) Constant/warble tone
- Continuity/polarity testing
- Talk battery supply
- Line 1 modular test lead (RJ-11)
- 3-color LED (identifies AC ring voltage)
- Weather resistant design
77M • $29.26
- Selectable warble tone
- Continuity/Polarity testing
- Talk battery supply
PE-K01 PROSCANNER NETWORK CABLE TEST SYSTEM • $369.00
PE-K02* OFFICE IDENTIFIER • $285.00
An all purpose, affordable, pocket sized cable test tool designed to check cabling integrity. PROSCANNER confirms wire length, wiring configuration, and the location of cable faults. PROSCANNER also offers the Office Identifier Kit for locating the termination points of cable drops in wiring closets; its unique tone feature simplifies locating remote cable ends and bundled cables. 
The PE-KO2 Office Identifier Kit and a signal enhancing grounding cord sold separately. (*Factory stocked)FEATURES:
- Pocket size, all purpose, affordable cable testing
- TDR Technology ensures accurate length results
- Verify configuration and continuity
- Locate short, open, split, or crossed pairs
- Patch cable testing without couplers or external adapters
- Locates remote cable ends & bundled cables
- Includes Master unit, Wiremap adapter, Cordura case
468 MODULAR CABLE TESTER • $120.74
Most voice and data network problems are wire related. Open or shorted pairs and general mis-wires are quickly diagnosed with the 468. Tester features a built-in tone generator; connect any 8-position modular plug to the appropriate jack on the transmitter and a sweeping tone signal is applied to all pairs. At the far end of the cable, use any 200 Series Inductive Amplifier to locate the corresponding plug or jack. Connecting the receiver unit automatically activates the test process. Sequencing red and green LEDs provide fast, accurate and easy to understand results. Model 468 identifies opens, shorts and transposed pairs, and alerts if connected to an active circuit, without harming the unit.- Test 258, T568A, T568B, 10Base-T, USOC standards
- Identify open, short, reversed and transposed pairs
- Send tone to identify cable at remote locations
508S WIRE FINDER • $240.00
For technicians who occasionally need to locate buried or in-wall wiring but don't require all the bells and whistles of a high priced locator. Compact design doesn't take up valuable truck space while easy to understand operations help avoid constantly referring to manuals. The 508S provides reliable results on buried cables to depths of 3 feet and lengths up to 1000 feet. The unit can even be used to determine the approximate depth of a wire or cable before you dig. Fully adjustable transmitter output and receiver gain improve system performance and locating accuracy. Comes housed in a durable, molded carrying case with a quick reference operation guide on the inside of the lid.
200EP INDUCTIVE AMPLIFIER • $61.26
Used in conjunction with any of our tone generators, the 200EP permits wire and cable identification without having to make direct metallic contact with the conductor. Powerful receiver gain permits accurate identification in even the most congested cable bundles and equipment rooms. Includes one each spare duckbill and metal tips.Model 200EP offers the same exceptional qualities as Model 200B plus an adjustable volume control for more precise identification when tone signal "bleed" is affecting the identification process, and recessed tabs for buttset or headset connections which, when connected, bypass the speaker.
801K TONE & PROBE KIT • $163.76
Progressive's finest wire identification kit, the 801K offers all the features professionals are looking for. Includes the 77HP/6A High Power Tone Generator with bent nose piercing clips, increased talk battery supply and higher voltage protection, and the 200FP Filter Probe for filtering out AC hum. Both units come housed in a high quality Cordura case designed for years of dependable use. All components are also available separately.One Demo model availabe 801K-XX $155.59
402K CATV TONE TEST KIT • $144.26
The 402K transmitter and receiver are equipped with female F-type connectors and provide both audible and LED test and tone indications. Optional adapter test leads allow 402K use on distribution cables as well as wire pairs or signal conductors. User defined tone output allows up to four 402T Toner units to be used simultaneously for tracing multiple cable runs.
401K CATV CABLE TONE TEST SET • $89.00
Designed for the CATV, SMTAV & MATV industries. The 401K sends tones through any passive device, including splitters, taps, directional couplers & traps. The kit includes the 401T toner & 401R receiver equipped with female F-connectors to provide audible & LED test & tone indications. Optional adapter test leads allow use on distribution cables & wire pairs or signal conductors.ACCESSORIES IN STOCK
77C - 77 Series Tone Generator Holster - $6.00 Fits any 77 Series model.
200C - 200 Series Inductive Amplifier Holster - $7.21 Fits any 200 series amplifier.
750C - Cabling Pouch - $33.00
Contains pockets designed for any one 77 Series tone Generator, any one 200 Series Inductive Amplifier, a punch-down tool, a cabling knife, and scissors. A convenient loop also will hold most telephone test sets. A removable pocket holds small components. Made of durable woven polyester. Fits belts up to 5” wide.
PT-T02 - Electrician’s Scissors - $9.90
Designed for cutting cable, telephone wire and stripping insulation, the PT-T02 has an upper blade with two stripping notches that will strip most insulations from 19-24AWG.Marsh also stocks line, voltage, circuit and electrical testers from:
Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.
Marsh Electronics, Inc.
N1042 Tower View Drive • Greenville, WI 54942
(920) 757-0800 • (800) 877-8919 • Fax (920) 757-0804
Questions? e-mail us.