Rohn Tower in stock at Marsh

ROHN TOWER
in stock at
Marsh Electronics

For detailed specification and drawings, please visit Rohn Industries.

Rohn 25G Tower Mid-Section • SB25G • Base Section & 25AG Top Section

The Rohn 25G is a versatile tower for mounting television antennas, satellite dishes and for ham radio use. The 25G is a sturdy tower with Zig-Zag cross bracing, comes in 10 foot sections, and a special 7 foot unit that is UPS shippable. The 25G is constructed from extra heavy-duty 1-1/4" steel tubing with electronic welds for stronger durability. The units receive Rohn's Hot Dip Galvanized finish for corrosion protection. The 25G can go up to 190 feet if properly guyed. All accessories are also treated for long life. The 25G has double bolted joints for sturdiness and dependability. This allows the units to be self-supporting providing a house bracket is used, and allows the tower to extend up to 35 feet above the bracket.

The 25AG Top Section is 9 feet long overall and made from the same strong steel with the galvanized finish.

20G Economy Home TV Tower • & 20AG Top

The 20G Series is not recommended for commercial, ham, CB or guyed installation. All other specifications and sizes are the same as the 25 series.

*Sales of Rohn Tower are limited to the continental U.S.A.

1. Towers mounted on these bases must be bracketed or guyed at all times. Temporary steel guying may also be necessary during installation and dismantling.
2. 3/4X12PP Pier Pin is a non-stocking item that must be ordered separately.
3. 1/2X12BB Base Bolts are non-stocking items that must be ordered separately.

ACCESSORIES FOR 20 & 25 SERIES TOWERS

AS25G ACCESSORY SHELF

For mounting many popular rotors. Fits both 20 & 25G. Some drilling may be necessary to fit certain rotors.

BPC25G CONCRETE BASE PLATE¹

For use with pier pin² embedded in concrete.
BPH25G Hinged Based Plate

BPH25G HINGED BASE PLATE¹

Bolts to concrete.³ Hinged to allow tower to be rotated up from base during installation.
HB25AG House Bracket

HB25AG ADJUSTABLE HOUSE BRACKET

15" house bracket for use with 20 & 25 towers.
Also available: HB25BG • 24" bracket HB25CG • 36" bracket

TB50 TOWER BUSHING

For use in 25AG top section.

RP25GCM SPECIAL ROTOR POST • For 25 & 20 towers.

OTHER ROHN ACCESSORIES

HEAVY DUTY, GALVANIZED WALL MOUNTS

In Stock: WM12D • WM18D • WM24D
Rohn Wall Mounts are made of durable glavanized steel and held in place with a unique "anti-twist" locking clamp to help ensure steady reception. They are easily and quickly installed on almost any surface. These wall mounts will support up to a 2.25" o.d. mast. Available models include 4, 8, 12, 18, and 24" stand-offs. Our in stock models are supplied with the upper and lower bracket (bolts directly to 16", 24" or 32" stud spacing for the three stocking models).Lag screws or attachment bolts must be ordered separately.

FRM125 NON-PENETRATING ROOF MOUNT

The FRM125 is designed for flat roof installation of MMDS and UHF/VHF antennas with no penetration of the roof surface. The galvanized steel mast is 5 feet tall and 1.25" in diameter. Concrete blocks are used to hold the mount in place. GEM Mount

GEM4060 ADJUSTABLE GABLE END MOUNTS

The GEM series of antenna mounts feature a galvanized finish for long-term corrosion protection. Constructed with a bottom support angle adjustable from 40" - 60", the GEM series is versatile enough to install almost any pitch roof. This design has four attachment points on the facia board. Mast brackets are designed for 4" clearance from the facia. The GEM4060 includes: 1 VWM4 (two brackets), 2 adjustable angles, 1 hardware package, lag screws. Tripot Roof Towers

TRIPOD ROOF TOWERS

In Stock Models: TRT60 • 5' Model TRT122 • 10' Model
Rohn Tripod Roof Towers feature universal mast clamps capable of mounting up to 1 3/4" diameter masts and support brackets made of 1 1/4" tubular legs. They are galvanized for long lasting corrosion protection.

Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.