SWITCHCRAFT AUDIO / VIDEO PRODUCTS IN STOCK AT
MARSH ELECTRONICS
(Click on links to view available images.)
| Q-G® CORD PLUG CONNECTORS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A(*)F CORD PLUG : Straight female cord plug with standard latchlock. Available in 3-7 pin versions. | |||||||||||
| A3F | 3 Pin | 5.63 | A4F | 4 Pin | 7.80 | A5F | 5 Pin | 12.72 | A6F | 6 Pin | 14.40 |
| A(*)M CORD PLUG : Straight male cord plug. | |||||||||||
| A3M | 3 Pin | 4.96 | A4M | 4 Pin | 5.72 | A5M | 5 Pin | 10.08 | Other Configurations Available | ||
| P(*)F MICROPHONE PLUG : Female microphone plug for gooseneck mount. Fits standard gooseneck with external 5/8-27 thread. Microphone plugs directly into connector. (Gooseneck not supplied.) | |||||||||||
| P3F | 3 Pin | 9.76 | Other Configurations Available | ||||||||
| P(*)M GOOSENECK PLUG : Male plug for gooseneck mount. Fits standard gooseneck with internal 5/8-27 thread. Use on gooseneck with microphone plug on opposite end. Plugs directly into female receptacle. (Gooseneck not supplied.) | |||||||||||
| P3M | 3 Pin | 7.84 | Other Configurations Available | ||||||||
| R(*)F CORD PLUG : The new R Series design allows the insert to rotate every 45 degrees; includes strain relief. | |||||||||||
| R3F | 3 Pin | 15.92 | Other Configurations Available | ||||||||
| R(*)M CORD PLUG : The new R Series design allows the insert to rotate every 45 degrees; includes strain relief. | |||||||||||
| R3M | 3 Pin | 14.70 | Other Configurations Available | ||||||||
| T(*)F CORD PLUG : Straight female cord plug with DPDT (2-C) locking on-off switch; standard latchlock. | |||||||||||
| T3F | 3 Pin | 20.60 | Other Configurations Available | ||||||||
| * Indicates number of contacts. | |||||||||||
| Q-G® RECEPTACLES | ||||||||
|---|---|---|---|---|---|---|---|---|
| B(*)M RECEPTACLE : Panel-mount male receptacle. Mounts with locknut from front of panels up to .250-inch (6.35 mm) thick. Requires .812-inch (20.64 mm) diameter mounting hole. For non-turning mounting, can be keyed to ÒDÓ shaped panel hole, or S3519 mounting adapter can be used. Satin nickel finish (Series B*M) or black finish (Series B*MB). | ||||||||
| B3M | 3 Pin | 8.84 | Other Configurations Available | |||||
| C(*)F RECEPTACLE : Female receptacle for panel or chassis mounting. Flange has three .140 inch (3.57 mm) diameter holes for #5-40 mounting screws (not supplied). Mounts from front of panel or chassis in 0.953 inch (24.21 mm) diameter hole | ||||||||
| C3F | 3 Pin | 8.44 | C5F | 5 Pin | 17.04 | Other Configurations Available | ||
| C(*)M RECEPTACLE : Male receptacle for panel or chassis mounting. Flange has three .140 inch (3.57 mm) diameter holes for #5-40 mounting screws (not supplied). Mounts from front of panel or chassis in .766 inch (19.45 mm) diameter hole. | ||||||||
| C3M | 3 Pin | 6.00 | Other Configurations Available | |||||
| D(*)F SERIES : Female receptacle for panel or chassis mounting. Flange has two .136-inch (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953-inch (24.21 mm) diameter hole. Series D(*)F has standard latchlock. | ||||||||
| D3F | 3 Pin | 6.30 | D4F | 4 Pin | 8.95 | D5F | 5 Pin | 14.48 |
| D(*)M SERIES : Male receptacle for panel or chassis mounting. Special rectangular flange permits close spacing on crowded panels, has two .136 inch (3.45mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .766 inch (19.45) diameter hole. Satin nickel finish. | ||||||||
| D3M | 3 Pin | 4.68 | D4M | 4 Pin | 5.56 | Other Configurations Available | ||
| * Indicates number of contacts. | ||||||||
| TINI Q-G® MINIATURE CONNECTORS | ||||||||
|---|---|---|---|---|---|---|---|---|
| Either shielded or unshielded cables can be used up to 0.115 inches (2.92 mm) in diameter (standard). Cable shield may either be connected to a pin/contact through circuit or may be connected to the cable clamp strain relief. This alternate connection permits using the metal housings of plugs to completely shield internal connections and pins/contacts. | ||||||||
| TA(*)F : STRAIGHT FEMALE CORD PLUG. | ||||||||
| TA3F | 3 Pin | 8.20 | TA4F | 4 Pin | 8.92 | TA5F | 5 Pin | 7.50 |
| TA(*)M : STRAIGHT MALE CORD PLUG | ||||||||
| TA3M | 3 Pin | 6.84 | TA4M | 4 Pin | 7.44 | Other Configurations Available | ||
| TB(*)M : Male receptacle for chassis/panel mounting. Specially designed flange permits close (front) mount on crowded panels. Mounting hardware supplied. | ||||||||
| TB5M | 5 Pin | 13.50 | Other Configurations Available | |||||
| * Indicates number of contacts. | ||||||||
| Q-G® CONNECTOR - ADAPTERS | ||
|---|---|---|
| 383A | 3C Female Audio Connector (Switchcraft® A3F) to standard .250" (6.35 mm) dia. 3C extension phone jack. | 15.84 |
| 384A | 3-Pin Male Audio Connector (Switchcraft® A3M) to standard .250" (6.35 mm) dia. 3C extension phone jack. | 14.52 |
| 386A | 3C Female Audio Connector (Switchcraft® A3F) to standard .250" (6.35 mm) dia. 3C extension phone plug. | 15.32 |
| 389 | 3C Female Audio Connector (Switchcraft® A3F) at both ends. Pre-wired pins: 1 to 1, 2 to 2, 3 to 3. | 12.96 |
| EAC RECEPTACLES | ||
|---|---|---|
| Two and three-pin/contact grounding primary power receptacles designed to meet EN 60 320, UL, CSA, VDE. | ||
| EAC309 | 3 Pin Male with standard lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied). | 2.20 |
| .141" TINI-JAX® MINIATURE PHONE JACKS | ||
|---|---|---|
| Tini-Jax 2-conductor phone jacks, (for limited space connecting, mate with miniature phone plugs having .141 inch diameter fingers and compatible tip shape) are 1/3 the size of Littel-Jax® and weigh less than 1/8 ounce. Mounting hole: .250 inch diameter in panels up to .125 inches thick (mounting hardware supplied). | ||
| 41 | Open circuit; mates with 750 plug | 1.76 |
| 42A | Shunted (closed circuit); mates with 750 plug | 2.10 |
| 43A | Special transfer circuit; mates with 750 plug | 3.04 |
| LITTEL-JAX® COMMERCIAL PHONE JACKS | ||
|---|---|---|
| 2- and 3-CONDUCTOR Littel-Jax phone jacks mate with standard commercial phone plugs and are available with .25 inch and .21 inch inside diameter bushings. | ||
| 11 | 2C; open circuit; mates with 250 plug. | 2.00 |
| 12A | 2C; tip shunt; mates with 250 plug. | 2.00 |
| 14B | 3C; double closed circuit; mates with 267 plug. | 5.04 |
| 1/4" ENCLOSED PHONE JACKS | ||
|---|---|---|
| Hi-D Jax® 2- and 3-conductor enclosed phone jacks are ideal for panel/chassis and PC board mounting. 2- and 3-conductor types, .276" long. .25" inside dia. bushings--threaded metal bushing (111PC, 112B, 113BPC, 114BPC) or molded thermoplastic for insulated mounting (N & NL Series). | ||
| 111PC | 2C; open circuit; mates with 250 plug | 1.88 |
| 112B | 3C; double open circuit; mates with 267 plug | 1.96 |
| 113BPC | 3C; single closed circuit; mates with 267 plug | 2.56 |
| 114BPC | 3C; double closed circuit; mates with 267 plug | 2.64 |
| N111 | 2C; for panels up to .156" thick | 2.24 |
| N112A | 2C; for panels up to .25" thick | 2.36 |
| N112B | 3C; for panels up to .156" thick | 2.48 |
| N114B | 3C; for panels up to .156" thick | 3.08 |
| NL112A | For panels up to .25" thick; .375" long bushing | 2.40 |
| STRAIGHT MINIATURE POWER JACKS | ||
|---|---|---|
| Mounts in .313 inch diameter hole in panels up to .125 inches thick (maximum). | ||
| 712A | .1" outside dia.; solder lugs; mates with 760 plug | 2.92 |
| 722A | . 8" outside dia.; solder lugs; mates with S760 plug | 2.93 |
| PC722A | .08" outside dia.; PC terminals; mates with S760K plug | 2.92 |
| RIGHT ANGLE MINIATURE POWER JACKS | ||
|---|---|---|
| 2-conductor right-angle power jacks for PC mounting. Three center conductor pin diameters: .100", .080", and .050". Three termination styles, through hole, surface mount and hybrid (combination through hole and surface mount) which allows use of universal PC board. Heat resistant materials for high temperature soldering. Flat top aids automatic placement on PC boards. Sleeve/shunt spring functions as a built-in 4 (eg. permits automatic switchover from AC to DC when plug is inserted or withdrawn). Also available with optional post which secures the jack to the PC board during insertion and withdrawal. | ||
| RAPC712 | .100" pin size; mates with 760 black handle plug | 1.08 |
| RAPC722 | .080" pin size; mates with S760 black handle plug | 1.08 |
| 1/4" FLAT PLUG PHONE PLUGS | ||
|---|---|---|
| Ideal where conventional long handled plugs are not suited to design of equipment. "Chassis-hugging" phone plugs allow cables to be brought out at right angles to equipment. Removable plastic cap for easy assembly of wire leads to either screw or solder lug terminals. Adapter clips on types 220 and 225 make it convenient to clamp standard phone tips to terminals. Terminals and body of plug mechanically interlocked, eliminating probability of any shifting. Cover is black or red plastic; plug body is a rugged assembly of all metal parts. One-piece tip rod staked into tip terminal to insure tightness, no disassembly of tip during use of plug. High grade insulation. | ||
| 220 | 2C .250" dia. sleeve & tip; black plastic handle; screw terminals | 4.76 |
| 227 | 2C .250" dia. sleeve & tip; red plastic handle; solder lug terminals | 3.68 |
| 228 | 2C .250" dia. sleeve & tip; shielded handle; solder lug terminals; mates with 11 jack | 4.40 |
| 238 | 3C .250" dia. sleeve & tip; shielded handle; solder lug terminals; mates with 12B jack | 5.68 |
| 230 | 3C .206" dia. sleeve & tip; black plastic handle; screw terminals; mates with 12B jack | 5.88 |
| S230 | 3C .206" dia. sleeve & tip; black plastic handle; screw terminals; mates with S12B jack | 8.65 |
| 1/4" COMMERCIAL PHONE PLUGS | ||
|---|---|---|
| LITTEL-PLUG® Phone Plugs : Heavy duty machined copper alloy handle (shielded versions), tip and body for unsurpassed ruggedness. Bright nickel plating on exterior surfaces will not chip or corrode. Solder terminals are tin electroplated for ease of soldering. One-piece tip rod staked into tip terminal ensures electrical continuity. Heavy duty cable clamp provides secure strain relief. | ||
| 240 | 2C; screw terminals; black handle; mates with 11 jack | 3.40 |
| 250 | 2C; solder lug & cable clamp terminals; black handle; mates with 11 jack | 3.20 |
| 280 | 2C; solder lug & cable clamp terminals; shielded handle; mates with 11 jack | 3.96 |
| 285L | 3C; larger cable clamp; .375" dia. hole in shielded handle for lager dia. cables; mates with 11 jack | 3.19 |
| 290 | 3C; screw terminals; shielded handle; mates with 12B jack | 5.80 |
| 297 | 3C; solder lug & cable clamp terminals; shielded handle; mates with 12B jack | 3.90 |
| POPULAR GENERAL PURPOSE Phone Plugs. Fit all standard jacks. Available in both 2- and 3-conductor types. Two-conductor plugs available with black or red molded plastic, or 3 different lengths of brass nickel-plated (shielded) handles. | ||
| 70 | Screw terminals; shielded handle; mates with 11 or Z15J jack. | 6.00 |
| 170 | Screw terminals; 2-pc. shielded handle with built-in cable clamp for .25" dia. cable; mates with 11 or Z15J jack. | 6.00 |
| 184L | Solder lug & cable clamp terminals; shielded handle; mates with 11 or Z15J jack. | 7.00 |
| 1/4" MILITARY TYPE PHONE PLUGS | |||||
|---|---|---|---|---|---|
| Designed for high quality communication equipment to meet military requirements, This series features one-piece tip rod and one-piece sleeve and plug body, assembled together into a mode as inserts, providing a finished plug with complete continuity of thermoplastic insulation between top rod and plug sleeve. Shielded handles. | |||||
| 482 | 3C; .25" dia. 11.92 | 484 | 3C; .206" dia. | 13.09 | |
| PHONO JACKS & PLUGS | ||
|---|---|---|
| Phono jacks and plugs are recommended for semi-permanent connections in audio and electronic applications. Where frequent connect/disconnect is anticipated, Switchcraft Littel-Jax® phone jacks and Littel-Plug® phone plugs are suggested. | ||
| 3501F | 2C Phono Jack with rigid plastic mounting flange; rear panel mount through .406 inch (10.32 mm) dia. hole, plus 2, .125" (3.18 mm) dia. mounting holes. | 1.52 |
| 3501FP | 2C Front Panel Mount Phono Jack, using hex nut (supplied); .438" (11.12 mm) outside dimension, can be mounted on .5" (12.7 mm) centers. Has 1/4 -32 bushing, mounts in .281" (7.14 mm) dia. hole in panels up to .25" (6.35 mm) thick. | 1.40 |
| 3503 | 2C Shielded Extension Phono Jack for use on end of cable; large, heavy duty cable clamp, removable handle and durable bright nickel plate on body and handle. | 2.96 |
| 3514PC | 2C PC Mount Phono Jack. Accepts plugs with pins up to .563 inch (14.3 mm) long; mates with 3502 plug. | 1.44 |
| 3517PC | 2C Right Angle PC Mount Phono Jack. Accepts plugs with pins up to .563 inch (14.3 mm) long; mates with 3502 plug. | 2.25 |
| 3502 | 2C Shielded Phono Plug with heavy duty cable clamp and removable handle; accepts cables up to .203 inch (5.16 mm) diameter; terminals may be crimped with pliers for temporary connections or soldered for permanent connections. Plug accommodates multiple jacks spaced on .438 inch (11.13 mm) centers. Nickel-plated copper alloy body and handle. | 1.96 |
| 1/4" EXTENSION JACKS (In-line) AND SPEAKER JACKS | ||
|---|---|---|
| Extension Jax® jacks are connected to the end of a cable. 2- and 3-conductor jacks mate with standard commercial phone plugs, and have a sturdy cable clamp strain relief, knurled shielded or molded black plastic handles, and a screw type solder terminal. All internal parts are interlocked. | ||
| 120 | 2C; shielded handle; screw terminals; mates with 250 plug. | 6.96 |
| 121 | 2C; shielded handle; solder lugs; cable clamp; mates with 250 plug. | 6.96 |
| 131 | 3C; shielded handle; solder lugs; mates with 267 plug. | 8.64 |
| JACK COVERS | ||
|---|---|---|
| Spring-loaded covers effectively seal front panel bushing openings from dust and dirt when mating plugs are not connected to jack. Series 500 is mounted with conventional threaded bushing jacks. Special locknut (comes with Series 500 jack covers) seals tightly against rubber washer when cover is closed. Series 600 is used with certain type tip jacks. Due to variable jack dimensions, two .031 inch washers are supplied. | ||
| 515 | Black | 7.44 |
| AUDIO ADAPTERS | ||
|---|---|---|
| 365 | EIA Standard 2-conductor Tini-Jax phone jack input to a phono plug output. Shielded. | 6.12 |
| DIN PLUGS & RECEPTACLES | ||
|---|---|---|
| 05BL5M | STRAIGHT CORD PLUG with Extended Barrel. 5-Pin at 180° male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp. | 4.56 |
| 09BL4M | Same as 05BL5M except 4 pins at 210°. | 4.08 |
| 06AL5F | STRAIGHT CORD PLUG with Flush Socket Insert. 5C at 180° female plug with ground contact. Diecast metal shell, nickel-plated. Two contact plug, Part number 04AL2F includes a break circuit switch (1-B) which is opened by engaging the insulated switch actuator of the mating plug or receptacle. Flexible black strain relief. | 5.12 |
| 59GB5F | RECEPTACLE with Closed Circuit Switch typical. Unique 3 and 5 contact receptacles include a 1-B (closed circuit) switch which is mounted to drawn metal shell. Switch is actuated by the shell of the mating plug. Receptacles also provide complete shielding through the ground contact. Flared solder terminals. 5C at 180°. | 2.72 |
| Cord-Switch® CORD SWITCHES | ||
|---|---|---|
| Momentary cord (pendant) switches can be specified with red or black pushbuttons, 1-C or 1-D switching, solder terminals and metal handle (Series E900), plastic handle (Series EP900), or metal handle with clamp and strain relief (Series ED900). | ||
| ED913 | Black Button. Max. cable .375" [9.5 mm] outside dia. 1C circuit | 8.95 |
| Littel-Switch® SWITCHES | ||
|---|---|---|
| Momentary switches feature leaf springs, insulating spacers, notched insulating washers and plated copper alloy bushing assembled into a rugged, reliable, long-life switch for limited space applications. Series 100 and 200 have integral .25 A contacts intended for low power switching where contact resistance is not critical. Series 100S and 200S have 3 A fine silver contact. Red and black pushbuttons, solder lug terminals and choice of 1-A, 1-B or 1-C switching are standard. Shaft and pushbutton molded as one piece. Captive shaft extends through bushing, actuated leaf springs. Notched phenolic washers insulate springs and interlock all members, eliminating possibility of springs shifting. All springs are insulated from bushing. | ||
| 101 | Red pushbutton; 1-A, SPST, (N.O.) | 3.92 |
Items shown on this page represent only our stocking items.
If you don't find what you are looking for, please give us a call.
Prices subject to change without notice.
Marsh Electronics, Inc.
N1042 Tower View Drive • Greenville, WI 54942
(920) 757-0800 • (800) 877-8919 • Fax (920) 757-0804
Questions? e-mail us.